There is a newer version of this Section
2021 Georgia Code
Title 40 - Motor Vehicles and Traffic
Chapter 6 - Uniform Rules of the Road
Article 2 - Traffic Signs, Signals, and Markings
§ 40-6-22. Pedestrian-Control Signals
Universal Citation: GA Code § 40-6-22 (2021)
Whenever special pedestrian-control signals exhibiting the words WALK or DON'T WALK or symbols so directing a pedestrian are in place, such signals shall indicate as follows:
- Word or symbol messageWALK. Pedestrians facing such signal may proceed across the roadway in the direction of the signal. Every driver of a vehicle shall stop and remain stopped for such pedestrians; and
- Flashing or steady DON'T WALK. No pedestrian shall start to cross the roadway in the direction of such signal, but any pedestrian who has partially completed his crossing on the WALK signal shall proceed to sidewalk or safety island while the DON'T WALK signal is showing.
(Ga. L. 1953, Nov.-Dec. Sess., p. 556, § 36; Code 1933, § 68A-203, enacted by Ga. L. 1974, p. 633, § 1; Ga. L. 1990, p. 2048, § 5; Ga. L. 1995, p. 229, § 2; Ga. L. 2013, p. 141, § 40/HB 79.)
Am. Jur. 2d.
- 7A Am. Jur. 2d, Automobiles and Highway Traffic, § 231.ALR.
- Liability for collision of automobile with pedestrian at intersection as affected by reliance upon or disregard of stop-and-go signal, 2 A.L.R.3d 155.
Disclaimer: These codes may not be the most recent version. Georgia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.