Motorola, Inc. v. United States, No. 01-00126 (Ct. Int'l Trade 2004)

Annotate this Case

Download PDF

Slip Op. 04-102 UNITED STATES COURT OF INTERNATIONAL TRADE BEFORE: SENIOR JUDGE NICHOLAS TSOUCALAS ________________________________________ : : : Plaintiff, : : v. : : UNITED STATES, : : Defendant. : ________________________________________: MOTOROLA, INC., Court No. 01-00126 Plaintiff, Motorola, Inc., moves pursuant to USCIT R. 56 for summary judgment on the ground that there is no genuine issue as to any material facts. Defendant cross-moves for summary judgment seeking an order dismissing the case. Held: Plaintiffs motion for summary judgment granted in part and denied in part. Defendant s cross-motion for summary judgment granted in part and denied in part. August 13, 2004 Katten Muchin Zavis Rosenman (Michael E. Roll, Kathleen M. Murphy, James L. Sawyer and John P. Smirnow) for Motorola, Inc., plaintiff. Peter D. Keisler, Assistant Attorney General; Barbara S. Williams, Attorney-in-Charge, International Trade Field Office, Amy M. Rubin, Commercial Litigation Branch, Civil Division, United States Department of Justice; of counsel, Chi S. Choy, Office of the Assistant Chief Counsel, International Trade Litigation, United States Bureau of Customs and Border Protection, for the United States, defendant. OPINION TSOUCALAS, Senior Judge: Plaintiff, Motorola, Inc. ( Motorola ), moves pursuant to USCIT R. 56 for summary judgment on the ground that there is no genuine issue as to any material facts. Court No. 01-00126 Page 2 Motorola contends that the merchandise at issue are classifiable as hybrid integrated circuits as a matter of law. Defendant cross- moves for summary judgment seeking an order dismissing the case. JURISDICTION The Court has jurisdiction over this matter pursuant to 28 U.S.C. § 1581(a) (2000). STANDARD OF REVIEW On a motion for summary judgment, the Court must determine whether there are any genuine issues of fact that are material to the resolution of the action. See Anderson v. Liberty Lobby, Inc., 477 U.S. 242, 248 (1986). A factual dispute is genuine if it might affect the outcome of the suit under the governing law. See id. Accordingly, the Court may not decide or try factual issues upon a motion for summary judgment. See Phone-Mate, Inc. v. United States, 12 CIT 575, 577, 690 F. Supp. 1048, 1050 (1988). genuine issues of material fact are not in dispute, When summary judgment is appropriate if a moving party is entitled to judgment as a matter of law. See USCIT R. 56; see also Celotex Corp. v. Catrett, 477 U.S. 317, 322-23 (1986). Court No. 01-00126 Page 3 DISCUSSION I. Background The merchandise subject to this action ( subject merchandise ) was entered through the port of Chicago between January and June of 1998. See Compl. ¶ 2. The subject merchandise are circuits used in cell phone battery packs for Motorola cell phones. See Mem. Supp. Pl. s Mot. Summ. J. ( Motorola s Mem. ) at 3. The United States Service1 Customs merchandise under ( Customs ) subheading liquidated 8536.30.80 of the the subject United States Harmonized Tariff Schedule ( HTSUS ) subject to a duty rate of 3.2 percent ad valorem. See Compl. ¶ 22. The subject merchandise are used in either nickel or lithium chemistry battery packs. See Motorola s Mem. at 3. Plaintiff filed a timely protest and application review for further with Customs challenging the classification of the subject merchandise under HTSUS 8536.30.80. See Compl. ¶ 4. on May 1, Customs issued Head Quarter Ruling ( HQ ) 961050 2000, and found that the subject merchandise are classifiable under subheading 8536.30.80 of the HTSUS, as other electrical apparatus for protecting electrical circuits. Motorola s Mem. Ex. 4 at 6. See In reaching its decision, Customs noted that the subject merchandise are not classifiable under 1 The United States Customs service was renamed the Bureau of Customs and Border Protection of the Department of Homeland Security, effective March 1, 2003. See H.R. Doc. No. 108-32 (2003). Court No. 01-00126 Page 4 subheading 8542.40.00 because Motorola s flex circuits are not constructed with a film layer directly on the substrate and in the mass. 2 See id. at 5. Motorola s protest in full. On See March 29, 2001, Customs denied Compl. ¶ 5. The HTSUS sections relevant to the Court s discussion are set forth below: 8536 Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp-holders, junction boxes), for a voltage not exceeding 1,000 V (con.): . . . . 8536.30 Other apparatus for protecting electrical circuits: 8536.30.40 Motor overload protectors . . .3.2% 8536.30.80 Other . . . . . . . . . . . . .3.2% . . . . 8542 Electrical integrated circuits and microassemblies; parts thereof: . . . . 8542.40.00 2 Hybrid integrated circuits . . . . . free A substrate is the physical material on which a microcircuit is fabricated; used primarily for mechanical support and insulating purposes, as with ceramic, plastic, and glass substrates. McGraw-Hill Dictionary of Scientific and Technical Terms 2061 (6th ed. 2003). Court No. 01-00126 II. Page 5 Customs Properly Classified Subject Merchandise Under Heading 8536 A. Contentions of the Parties 1. Motorola s Contentions Motorola contends that Customs improperly subject merchandise under HTSUS heading 8536. at 28. classified See Motorola s Mem. Specifically, Motorola argues that the subject merchandise should have been classified under heading 8542. rule the one of the classification is General Rules determined of See id. Interpretation according to the Under ( GRI terms of 1 ), the headings and any relative section or chapter notes. Id. Motorola points out that headings 8541 and 8542 shall take precedence over any other heading in the tariff schedule which might cover them by reference to, in particular, their function. Id. (quoting Harmonized Commodity Description and Coding System, Explanatory Note, 85.42 (3rd ed. 2002) ( Explanatory Note ) at 1,700) (emphasis omitted). Accordingly, if the [subject merchandise] are classifiable in HTSUS heading 8542, they cannot be classified in heading 8536. Id. Motorola contends that the subject merchandise are defined in Note 5 of the HTSUS microassemblies. Explanatory Note as electronic See id. at 29. set out the integrated circuits and Motorola asserts that the following four elements for Court No. 01-00126 Page 6 classifying an article as a hybrid integrated circuit : (1) an active element obtained by semiconductor technology; (2) a passive element obtained by thin or thick film technology; (3) a single insulating substrate; and (4) the active and passive elements must be indivisibly combined on the substrate. See id. (citing Explanatory Note at 1,700). Although Motorola concedes that the components theoretically can be removed from the substrate, Motorola maintains that it does not remove the components from the substrate once they are attached. See id. at 30. Customs expert did not contradict evidence that Motorola intends for the elements to be permanently attached to the substrate. See id. at 30-31. Based on this intention, Motorola asserts that Customs needs more than speculation or hypotheticals to create an issue of fact. Id. at 31. Motorola also argues that Customs HQ 916050 is not entitled to judicial deference because courts retain an independent responsibility to decide the legal issue regarding the proper meaning and scope of tariff terms. Id. at 7. Motorola asserts that judicial deference is only appropriate if a statute is ambiguous and Congress has left it to the agency to determine the meaning of the ambiguity. Pl. s Opp n Def. s Cross-Mot. Summ. J. & Reply Def. s Opp n Pl. s Mot. Summ. J. ( Motorola s Reply ) at 1. Motorola argues that the plain language of the statutes at issue is Court No. 01-00126 Page 7 clear and unambiguous and, therefore, no judicial deference is warranted. See id. at 1-2. In addition, Motorola asserts that when classification rulings, such as HQ 916050, are at issue the Court need only defer to them if it finds them persuasive. Motorola s Mem. at 8 (citing Skidmore v. Swift & Co., 323 U.S. 134 (1944)). 2. Customs Contentions Customs replies that the subject merchandise does not fall within the definition of hybrid integrated circuits and, therefore, was properly classified under heading 8536 of the HTSUS. See Def. s Mem Sup. Cross-Mot. Summ. J. & Opp n Pl. s Mot. Summ. J. ( Customs Mem. ) at 13-22. The parties agree that the subject merchandise contain three of the four elements set forth in the definition of hybrid integrated circuits in Note 5(b)(ii) of Chapter 85. See id. at 16. indivisible means that The Explanatory Note provides that though some of the elements could theoretically be removed and replaced, this would be a long and delicate task which would manufacturing conditions. be uneconomical under normal Id. at 18 (quoting Explanatory Note). Here, the evidence indicates that separating the elements from the substrate is economical and not a long and delicate task. See id. Accordingly, Customs maintains that classification under heading 8542 is not appropriate. Court No. 01-00126 Page 8 Customs additionally argues that to meet the definition of hybrid integrated circuits the subject merchandise must contain passive elements substrate. that See id. are produced at the same time as the Customs asserts that [i]t is incontestable that none of the components on the [subject merchandise] in issue were produced at the same time as the substrate. Id. Rather, the substrate was purchased by Motorola from an unrelated supplier and then the components were soldered onto the substrate by Motorola. See id. at 18-19. Motorola s expert stated that elements on the subject merchandise were indivisibly combined on the substrate, even though commercially available machinery exists that could remove and replace defective components. See id. at 19. Motorola, however, discards defective subject merchandise because it is more economical than merchandise. incurring See id. the time and expense to fix such Customs contends that [w]hile Motorola may have made a business decision not to remove and replace components that are found to be defective on these particular assemblies, that does not render them indivisibly combined for purposes of tariff classification. Id. at 20. Customs maintains that the test for whether components are indivisibly combined is objective and not subject to the whims of an individual importer or manufacturer. Id. The test for whether the indivisible element has been met is whether removing and replacing elements on the circuit would be a long and delicate task that would render the procedure uneconomical Court No. 01-00126 Page 9 under normal manufacturing conditions. Id. at 21. Motorola did not establish that the procedure to replace defective components on the subject merchandise would be a long and delicate process. id. See Consequently, the subject merchandise do not satisfy the tariff definition of hybrid integrated circuits and were properly classified under heading 8536. See id at 21-22. Customs also argues that HQ 961050 is entitled to Skidmore respect. See id. at 10-13. Customs notes that Congress dictated that, in an action in which an importer is challenging the denial of a protest on an issue such as [the one] raised here, Customs decision is presumed to be correct. § 2639(a)(1) (1994)). Customs Id. at 12 (citing 28 U.S.C. argues that the Court should recognize Customs expertise in administering and interpreting the tariff statute. See id. Based on its thorough and reasoned analysis, and the formality related to the issuing of its decision, Customs contends that HQ 961050 is entitled to Skidmore deference. B. Analysis 1. Motion for Summary Judgment Determining whether imported merchandise was classified under the appropriate tariff provision entails a two-step process. See Sabritas, S.A. de C.V. v. United States, 22 CIT 59, 61, 998 F. Supp 1123, 1126 (1998). First, the proper meaning of specific terms in Court No. 01-00126 Page 10 the tariff provision must be ascertained. Second, whether the imported merchandise falls within the scope of such term, as properly construed, must be determined. See Sports Graphics, Inc. v. United States, 24 F.3d 1390, 1391 (Fed. Cir. 1994). The first step is a question of law and the second is a question of fact. See id.; see also Universal Elecs., Inc. v. United States, 112 F.3d 488, 491 (Fed. Cir. 1997). Customs classification challenging otherwise. the See is Pursuant to 28 U.S.C. § 2639(a)(1), presumed classification Universal correct bears Elecs., the 112 and burden F.3d at the of 491. party proving This presumption, however, applies only to Customs factual findings, such as whether the subject merchandise falls within the scope of the tariff provision, and not to questions of law, such as Customs interpretation of a particular tariff provision. See Sabritas, 22 CIT at 61, 998 F. Supp. at 1126; see also Universal Elecs., 112 F.3d at 491; Goodman Mfg., L.P. v. United States, 69 F.3d 505, 508 (Fed. Cir. 1995). When there are no material issues of fact in dispute, as is admitted by both parties in the present case, the statutory presumption of correctness is irrelevant. Goodman Mfg., 69 F.3d at 508. The ultimate question in every tariff classification is one of law: whether the merchandise is properly classified under one or another classification heading. Bausch & Lomb, Inc. v. United Court No. 01-00126 Page 11 States, 148 F.3d 1363, 1365 (Fed. Cir. 1998). Where, as in the instant case, there is no disputed material issue of fact to be resolved by trial, disposition by summary judgment is appropriate. Pursuant to 28 U.S.C. § 2640(a) (1994), Customs classification decision is subject to de novo review based upon the record before the Court. Accordingly, the Court must determine whether the government s classification is correct, both independently and in comparison with the importer s alternative. Jarvis Clark Co. v. United States, 733 F.2d 873, 878 (Fed. Cir. 1984). 2. Skidmore Respect As a preliminary matter, the Court finds that HQ 961050 is entitled Skidmore respect. In Skidmore, 323 U.S. at 140, the Supreme Court set forth the factors a reviewing court is to consider in determining how much weight an agency s decision is to be afforded. decision The amount of respect a court affords an agency s will depend upon the thoroughness evident in its consideration, the validity of its reasoning, its consistency with earlier and later pronouncements, and all those factors which give it the power to persuade, if lacking power to control. Customs classification ruling s power to persuade Id. may A vary depending on the Skidmore factors articulated in United States v. Mead, 533 U.S. 218 (2001). States, 356 F.3d 1366, See Structural Indus., Inc. v. United 1370 (Fed. Cir. 2004). Customs has Court No. 01-00126 Page 12 specialized experience which can aide the Court in its review of the questions at issue in this case. See Mead, 533 U.S. at 234. Accordingly, Customs classification rulings are entitled to a respect proportional to [their] power to persuade. Mead, 533 U.S. at 235 (quoting Skidmore, 323 U.S. at 140). Motorola argues that deference is not warranted because the statutory language defining hybrid integrated circuits is plain and unambiguous. See Motorola s Reply at 1-2. The central issue, however, is the meaning of the indivisible requirement contained in the statutory definition of hybrid integrated circuit. The Court has an independent responsibility to decide the legal issue regarding the proper meaning and scope of the HTSUS terms. Mead Corp. v. United States, 283 F.3d 1342, 1346 (Fed. Cir. 2002) (citing Rocknel Fastener, Inc. v. United States, 267 F.3d 1354, 1358 (Fed. Cir. 2001)). Here, Skidmore deference may be warranted if HQ 961050 contains all those factors which give it the power to persuade, if lacking power to control. Skidmore, 323 U.S. at 140. For the reasons set forth below, the Court finds that the thoroughness and valid reasoning of HQ 961050 is entitled Skidmore respect. 3. Classification Under Heading 8536 Pursuant to GRI 1, the definition and scope of terms of a particular provision is to be determined by the wording of the Court No. 01-00126 Page 13 statute and any relevant section or chapter notes. 22 CIT at 62, 998 F. Supp. at 1126-27. See Sabritas, GRI 1 states that classification shall be determined according to the terms of the headings and any relative section or chapter notes . . . . If a tariff term is not statutorily defined in the HTSUS and its intended meaning cannot be discerned from legislative history, then the definition is determined commercial meaning. by ascertaining its common See Lynteq, 976 F.2d at 697-98; see also and Mita Copystar Am. v. United States, 21 F.3d 1079, 1082 (Fed. Cir. 1994). To ascertain a tariff term s common meaning, the Court may consult dictionaries and scientific understanding of the term. authorities, as well as its own See Brookside Veneers, Ltd. v. United States, 847 F.2d 786, 789 (Fed. Cir. 1998), cert. denied, 488 U.S. 943 (1988). The Court, in determining the definition of tariff terms, may also use the explanatory notes to the HTSUS, which provide guidance in interpreting the language of the statute. See Bausch & Lomb, Inc. v. United States, 21 CIT 166, 174, 957 F. Supp. 281, 288 (1997), aff d, 148 F.3d at 1363.3 3 The explanatory notes are not legally binding on the United States, yet they generally indicate the proper interpretation of provisions within the HTSUS . . . [and] are persuasive authority for the Court when they specifically include or exclude an item from a tariff heading. Sabritas, 22 CIT at 62, 998 F. Supp at 1127. Court No. 01-00126 Page 14 Note 5(b)(ii) to Chapter 85 sets forth the definition for items classified under heading 8542 as electronic integrated circuits and microassemblies. Such items include hybrid integrated circuits in which passive elements . . . obtained by thin- or thick-film technology and active elements . . . obtained by semiconductor technology, are combined to all intents and purposes indivisibly, on a single insulating substrate . . . . HTSUS Ch. elaborates 85 and Note 5(b)(ii). states that The hybrid Explanatory integrated Note further circuits are microcircuits built up on an insulating substrate on which a thin or thick film circuit has been formed. The Explanatory Note further provides that the components forming a hybrid integrated circuit must be combined to all intents and purposes indivisibly, i.e., though some of the elements could theoretically be removed and replaced, this would be along and delicate task which would be uneconomic under normal manufacturing conditions. Id. (emphasis in original). The statute and accompanying Explanatory Note set forth the scope of heading 8542 and the definition of hybrid integrated circuits. Here, whether or not Motorola actually removes or replaces some of the components forming the subject merchandise is irrelevant. The definition of hybrid integrated circuits does not contemplate the actions of a single manufacturer or importer. Court No. 01-00126 Page 15 Rather, the statute requires that the components of the item be combined to all intents and purposes indivisibly, on a single substrate. The Explanatory Note indicates that the indivisibility element is measured by whether it is uneconomical or impractical to remove or replace the components from the substrate. In the present case, Motorola has failed to present evidence indicating that the subject merchandise meet this requirement. While Motorola does not remove or replace the components from the substrate or have the intention to do so, the subject merchandise fail to meet the definition of hybrid integrated circuits.4 See Motorola s Mem. at 30. Motorola s decision to keep the components on the substrate intact does Consequently, not render Customs the subject properly merchandise determined that indivisible. the subject merchandise do not satisfy the definition of hybrid integrated circuits and are not classifiable under heading 8542 of the HTSUS. Consequently, Customs properly classified the subject merchandise under heading 8536 of the HTSUS, and the decision set forth in HQ 961050 is entitled Skidmore respect. 4 Motorola does not dispute Customs expert who stated that there is commercially available equipment that can be used to remove the components from the substrate. See Motorola s Reply at 4. Motorola also concedes that theoretically the components can be removed and that other companies making different articles may remove the elements. Motorola s Mem. at 30. Court No. 01-00126 Page 16 III. Customs Failure to Publish HQ 961050 in the Customs Bulletin Did Not Violate 19 U.S.C. § 1625(c) A. Statutory Background Section 1625 of Title 19 of the United States Code sets forth certain measures Customs must take with respect to interpretive rulings and decisions. Customs must publish in the Customs Bulletin or make available for public inspection any interpretive ruling (including any ruling letter, or internal advice memorandum) . . . . 19 U.S.C. § 1625(a) (1994). Section 1625(c)(1) of Title 19 of the United States Code directs Customs to publish in the Customs Bulletin a decision that modifies or revokes interpretive rulings or decisions that have been in effect for at least 60 days. Customs is also directed to publish decisions that modify Customs previous treatment of substantially identical transactions. See 19 U.S.C. § 1625(c)(2). The statute states, in pertinent part: (c) Modification and revocation A proposed interpretive ruling or decision which would (1) modify (other than to correct a clerical error) or revoke a prior interpretive ruling or decision which has been in effect for at least 60 days; or (2) have the effect of modifying the treatment previously accorded by the Customs Service to substantially identical transactions; shall be published in the Customs Bulletin. The Secretary shall give interested parties an opportunity to submit, during not less than the 30-day period after the date of such publication, comments on the correctness of the proposed ruling or decision. Court No. 01-00126 Page 17 19 U.S.C. § 1625(c). Customs regulations define a ruling as a written statement issued by the Headquarters Office . . . that interprets and applies the provisions of the Customs and related laws to a specific set of facts. See 19 C.F.R. § 177.1(d)(1) (1998). A ruling letter is defined as a ruling issued in response to a written request therefor and set forth in a letter addressed to the person making the request or his designee. Id. With respect to the effect of ruling letters, Customs regulations state that a ruling letter represents the official position of the Customs Service with respect to the particular transaction or issue described therein and is binding on all Customs Service personnel . . . until modified or revoked. 19 C.F.R. § 177.9(a)(1998). Furthermore, [i]n the absence of a change of practice or other modification or revocation which affects the principle of the ruling set forth in the ruling letter, that principle may be cited as authority in the disposition of transactions involving the same circumstances. Id. Ruling letters indicating the proper classification of merchandise under the HTSUS will be applied only with respect to transactions involving articles identical to the sample submitted with the ruling request or to articles whose description is identical to the description 177.9(b)(2). set forth in the ruling letter. 19 C.F.R. § Court No. 01-00126 B. Page 18 HQ 961050 Does Not Modify or Revoke a Prior Interpretive Ruling Letter 1. Contentions of the Parties a. Motorola s Contentions Motorola complains that Customs liquidation of the subject merchandise pursuant to HQ 961050 violated 19 U.S.C. § 1625(c)(1). See Motorola s Mem. at 12-20. Specifically, Motorola contends that the classification of the subject merchandise modifies or revokes the two pre-classification ruling letters obtained by Motorola in 1992 and 1994 ( PRLs ).5 See id. at 12-13. Consequently, by liquidating the subject merchandise under heading 8536 without first publishing HQ 961050 in violated 19 U.S.C. § 1625(c)(1). the Customs Bulletin, Customs See id. at 13. Motorola argues that the PRLs meet the definition of the term interpretive ruling because 19 U.S.C. § 1625(a) includes any ruling letter, or internal advice memorandum[] or protest review decision under this chapter with respect to any customs transaction 5 In 1992, Motorola sought and obtained Customs opinion as to the classification of six models of nickel-chemistry battery hybrid integrated circuits. See Motorola s Mem. at 11. In PRL 878763, Customs classified the six models under subheading 8542.20.00, the 1992 version of subheading 8542.40.00, of the HTSUS. See id. Similarly, Motorola obtained Customs opinion as to the classification of other models of nickel-chemistry battery hybrid integrated circuits in 1994. See id. In PRL 894316, Customs classified the six models under subheading 8542.40.00 of the HTSUS and again classified three of the hybrid integrated circuits previously classified in PRL 878763 under subheading 8542.40.00 of the HTSUS. See id. Court No. 01-00126 . . . . Page 19 Id. at 14 (quoting 19 U.S.C. § 1625(a)). If Congress intended to exclude PRLs from the definition, then it would have explicitly done so. See id. Furthermore, Congress did not provide Customs with the discretionary power to interpret the statute because the language therein indicates that Congress intended for Customs to follow the procedural requirements of Section 1625(c) when it issues an interpretive ruling or decision. Id. at 15. In American Bayridge Corp. v. United States, 22 CIT 1129, 35 F. Supp. 2d 922 (1998), vacated on other grounds, 217 F. 3d 857 (Fed. Cir. 1999), the Court reviewed the legislative history of the statute and rejected Customs narrow interpretation of 19 U.S.C. § 1625(c). See Motorola s Mem. at 14-16. The Court opined that the legislative history of the statute indicates that Congress did not intend to grant Customs discretion. should rely on American Bayridge and See id. reject The Court Customs narrow interpretation of the statute because Customs in this case has read an unwarranted exception into the statue to limit the scope of Section 1625(c). Id. at 16. Motorola also notes that Customs literature explaining PRLs indicates that they are binding classification rulings, which stay in effect until modified or revoked by Customs. See id. at 18. The characterization of the PRLs as anything other than rulings is contrary to Customs description of the Pre-Importation Review Court No. 01-00126 Page 20 Program ( Program ).6 See id. Motorola asks the Court to give the term ruling in 19 U.S.C. § 1625(c) the same definition provided for purposes of 28 U.S.C. § 1581(h), as a determination as to the treatment for the contemplated transaction. See id. at 19 (citing Holford USA Ltd., Inc. v. United States, 19 CIT 1486, 1489-90, 912 F. Supp. 555, 558 (1995)). Motorola argues that [i]f Congress had intended the word ruling in [19 U.S.C. § 1625(c)] to be different from that applied elsewhere express[ed] such an intent. deduces that Customs in Customs Id. at 19. interpretation law, it would have Consequently, Motorola of the statute is inconsistent with (1) the express terms of PRLs 878763 and 984316 [;] (2) the objectives of the Pre-Importation Review Program[;] and (3) prior judicial and regulatory definitions of the phrase ruling. Id. at 17. Motorola asserts that HQ 961050 modifies or revokes the PRLs, even though it involved merchandise with different part numbers. See Motorola s Reply at 14-15. published guidelines Motorola notes that there are no indicating whether Motorola should contacted Customs for a new PRL if a part number changed. have See id. Motorola further asserts that four of the items at issue are 6 Motorola s PRLs were issued pursuant to the Program, a cooperative, voluntary program between Customs and importers. See Customs Mem. at 25. Under the Program guidelines, Customs issues PRLs to importers indicating how merchandise specified therein will be classified upon entry. See Motorola s Mem. Ex. 4. Court No. 01-00126 Page 21 substantially identical to the items that were listed on the PRLs [which] confirms that Motorola did not have to report back to Customs because the nature of its merchandise had not changed. Id. at 15. The method Motorola used to indivisibly combine the four remaining items and the use of those items also remained the same. See id. Consequently, Motorola contends that its decision not to seek a new PRL was reasonable because it had obtained two PRLs that both classified this type of merchandise in HTSUS Heading 8542. Id. b. Customs Contentions Customs replies that Motorola has failed to establish the required elements of 19 U.S.C. § 1625(c)(1). 22-28. See Customs Mem. at Motorola has failed to demonstrate that HQ 961050 either modifies or revokes a prior interpretive ruling or decision which has been in effect for at least 60 days. See id. at 22. Customs argues that, although the definition of interpretive ruling encompasses HQ 961050, it does not encompass either of the PRLs. See id. at 24. The PRLs are not interpretive rulings because the common meaning of the term interpretive involves something that provides an explanation. Id. To be considered interpretive rulings, the PRLs must explain a statute or provide an explanation of Customs interpretation of the statute. See id. Interpretive rulings, Customs notes, are publically available complex written Court No. 01-00126 Page 22 analyses by Customs interpreting and applying the facts and law. Id. The PRLs do not meet the requirements of interpretive rulings because they lack detail and analysis, and do not include an interpretation of how Customs law applies to the specific set of facts. See id. at 26. Moreover, the PRLs are not interpretive rulings because they are bare-bones, consisting only of a list of article identifiers, brief descriptions and tariff numbers. Id. Customs relied on the characteristics of each item provided by Motorola and did not review or analyze every item identified in the PRLs. See id. Customs also notes that pursuant to 19 U.S.C. § 1625(a), an interpretive ruling, ruling letter, internal advice memorandum or protest review decision must be published in the Customs Bulletin or otherwise made publically available. See id. at 24. Customs argues that 19 U.S.C. § 1625(a) must be read in pari materia with subsection 1625(c). See id. Customs argues that the PRLs are not encompassed by 19 U.S.C. § 1625(c) because they were not published in the Customs Bulletin or otherwise made publically available. See id. The PRLs were only given to Motorola and apply exclusively to Motorola s import transactions, as defined by the article identifiers and tariff numbers. See id. at 26. Consequently, Customs decision in HQ 961050 does not modify or revoke a prior interpretive ruling or decision because the PRLs do not meet the Court No. 01-00126 Page 23 definition of interpretive ruling. Customs alternatively argues that even if the PRLs are interpretive rulings, HQ 961050 did not modify or revoke them. See id. at 28. Rather, HQ 961050 did not involve articles bearing part numbers which appear on either of the preclassification rulings . . . . substantially Id. Customs asserts that Motorola confuses the identical transactions language of section 1625(c)(2), which involves the modification of a treatment, with the language of 1625(c)(1) dealing with revocation of a prior interpretive ruling. the modification or Def. s Reply Pl. s Resp. Def. s Cross-Mot. Summ. J. ( Customs Reply ) at 12. Customs maintains that the PRLs apply only to the merchandise they identify therein. See id. Consequently, HQ 961050 and the PRLs are unrelated rulings and the former does not revoke or modify any determination rendered in either of the PRLs. See Customs Mem. at 28. 2. Analysis Both parties assert that the central issue is whether the PRLs are interpretive rulings within the scope of the statute. It is uncontested that HQ 961050 is an interpretive ruling. See Customs Mem. at 24; Motorola s Mem. at 13. Consequently, the Court must determine (1) whether the PRLs are interpretive rulings under 19 U.S.C. § 1625(c)(1), and (2) if the PRLs are interpretive rulings, Court No. 01-00126 Page 24 whether HQ 961050 modifies or revokes them. For the reasons set forth below, the Court finds that the PRLs meet the definition of interpretive rulings, and that HQ 961050 does not modify or revoke a prior interpretive ruling. Accordingly, Customs failure to publish HQ 961050 in the Customs Bulletin did not violate 19 U.S.C. § 1625(c)(1). First, the Court agrees with Motorola s assertion that the PRLs are interpretive rulings. The statute defines interpretive ruling as any ruling letter, internal advice memorandum or protest review decision. See 19 U.S.C. § 1625(a). The statute directs Customs to publish such interpretive ruling in the Customs Bulletin within 90 days after the date of issuance. See id. Customs notes that the PRLs do not meet the definition of an interpretive ruling because neither was published in the Customs Bulletin; the PRLs were made available only to Motorola. See Customs Mem. at 26. Customs logic, however, is unconvincing. The statute does not state that to be considered an interpretive ruling the letter must be published in the Customs Bulletin. Rather, the statute directs Customs to publish interpretive rulings, which includes any ruling letter or internal advice memorandum, in the Customs Bulletin. See 19 U.S.C. § 1625(a). A letter may be an interpretive ruling even if Customs fails to publish such a ruling letter. Court No. 01-00126 Page 25 Contrary to Customs contention, the PRLs do interpret and apply Customs law to a particular set of facts. Customs notes that its regulation define a ruling as a written statement that interprets and applies the provisions of the Customs and related laws to a specific set of facts. Customs Mem. at 25 (quoting 19 C.F.R. § 177.1(d)(1)). Customs argues that the PRLs do not fulfill either one of these requirements because they fail to give an interpretation of the law or analyze how the law applies to a specific set of facts. See id. at 26. The Court, however, disagrees with Customs assertions. Under the Program, Customs classification rulings [are] based on an item-by-item review of the importers product inventory. Motorola s Mem. Ex. 3 at 3. In determining the classification of an item, Customs implicitly analyzes each item. Otherwise, Customs could not properly classify the merchandise identified in the PRLs. Moreover, the PRLs implicitly provide an interpretation of Customs law that is applied to a specific set of facts. The purpose of the Program, according to Customs literature, is to resolve classification, valuation, and admissibility issues prior to importation thereby expediting import processing. Id. at 1. Customs list of items and their respective classification in the PRLS binds Customs. See id. at 3. In making a binding ruling, Customs must interpret and apply the HTSUS to the merchandise at Court No. 01-00126 issue. Page 26 Failure to do so would lead to classifications that are arbitrary and not in accordance with law. Although the PRLs are bare-bones, they contain a list of identifiers, brief description and tariff determination.7 numbers indicating Customs See Motorola s Mem. Ex. 1 & 2. classification The review process Customs undertakes when preparing a PRL requires an interpretation and application of the relevant HTSUS heading. Based on the definition of interpretive rulings offered by Customs, the Court finds that, for the purposes of 19 U.S.C. § 1625(c)(1), the PRLs are prior interpretive rulings. Second, although the PRLs are interpretive rulings, HQ 961050 does not modify or revoke them. Customs is required to publish in the Customs Bulletin any interpretive ruling or decision, if and only if, it modifies or revokes a prior interpretive ruling. 19 U.S.C. § 1625(c)(1). See Each PRL applies only to shipments of the merchandise actually reviewed and covered under the specific ruling decision. Motorola s Mem. Ex. 3 at 4. In its description of the Program, Customs states that PRLs will be made available only in those instances where the importer s product inventory lends itself to an item-by-item review . . . . 7 Id. at 3. Consequently, Although the PRLs do not contain a detailed explanation of Customs determination, the PRLs announce Customs decision based on an interpretation of the statute. In order to be interpretive rulings, the PRLs do not have to contain a detailed description of Customs reasoning. Court No. 01-00126 Page 27 Customs pre-classification ruling binds Customs only with respect to the items identified in the PRLs and not any other merchandise, even if it is substantially identical. In the case at bar, Motorola does not argue that the subject merchandise is covered by the PRLs. Rather, Motorola argues that the PRLs identify certain items that are substantially identical to some of the subject merchandise. See Motorola s Reply at 15. For the remaining subject merchandise, Motorola argues that they were made the same way and have the same use as the articles listed in the PRLs. See id. Based on the similarities of the merchandise identified in the PRLs and the subject merchandise, Motorola argues that HQ 961050 modifies or revokes a prior interpretive ruling. See id. Motorola s arguments, however, are untenable. The merchandise covered by HQ 961050 is different than that covered by the PRLs. HQ 961050 is an interpretive ruling or decision that has no bearing whatsoever on the merchandise identified in the two prior PRLs. Accordingly, the Court finds that Customs failure to publish HQ 961050 is not a violation of 19 U.S.C. § 1625(c)(1) because it is an interpretive ruling or decision that does not modify or revoke a prior interpretive ruling. Court No. 01-00126 C. Page 28 HQ 961050 Modifies the Treatment Previously Accorded to Certain Substantially Identical Transactions 1. Contentions of the Parties a. Motorola s Contentions Motorola alternatively argues that Customs violated 19 U.S.C. § 1625(c)(2). See Motorola s Mem. at 20. Motorola contends that HQ 961050 effectively modified the treatment Customs afforded to substantially identical merchandise and, therefore, it should have been published in the Customs Bulletin. See id. Motorola argues that the disposition of merchandise prior to the issuance of HQ 961050 constitutes a treatment. Furthermore, the merchandise Motorola imported prior to Customs classification of the subject merchandise under HTSUS heading 8536 (the earlier merchandise ) is substantially identical to the subject merchandise. Consequently, the classification of the subject merchandise under heading 8536, modified the treatment of substantially identical transactions, and Customs was required to publish its decision in the Customs Bulletin. First, Motorola argues that classification of the subject merchandise under heading 8536 of the HTSUS modifies the treatment afforded to merchandise imported pursuant to the PRLs. See id. Such classification also modified the treatment afforded to over 900 entries of substantially identical merchandise imported by Motorola between May 1995, and May 1997. See id. Customs concedes Court No. 01-00126 Page 29 that its liquidation of ten models of hybrid integrated circuits in over 900 entries can constitute a treatment for purposes of 19 U.S.C. § 1625(c)(2). See id. Customs maintains, however, that since the 900 entries were on bypass status they could not receive a treatment. See id. Motorola asserts that this narrow interpretation of the term treatment does not comport with the Court s broad interpretation, in Precision Specialty Metals, Inc. v. United States, 24 CIT 1016, 1040-44, 116 F. Supp. 2d 1350, 137378 (2000). The Court held that the payment of 69 drawbacks during a four-and-a-half year period constituted a treatment. See id. Motorola further asserts that even if the subject merchandise is on bypass status, Customs remains responsible for the classification of the imported items. See Motorola s Reply at 17. Consequently, Motorola maintains that the consistent classification of over 900 entries during a two-year period, as well as the classification of merchandise pursuant to the PRLs, also constitutes a treatment. See Motorola s Mem. at 22. Second, Motorola argues that the subject merchandise and the earlier merchandise are substantially identical. See id. at 23- 28. Both were made using the same method of construction and their functions are the same: (1) they connect the charging device and the battery cells; (2) they connect the cell phone or two way radio and the battery cells; (3) they identify the battery pack to the Court No. 01-00126 Page 30 charging device; (4) they sense battery cell temperature; and (5) they provide a safety mechanism. that there merchandise. are differences See id. at 25. See id. at 23. between the Motorola notes earlier and subject Yet, Motorola argues that the test is based on substantial and not exact identity, and even Customs expert considers them substantially identical. Id. at 25. Furthermore, Customs expert agreed that four of the subject merchandise, the nickel-chemistry assemblies, are substantially identical to the hybrid integrated circuits covered by the PRLs and the merchandise imported between May 1995, and May 1997. See id. The criteria used to determined substantial identity should be (1) the function and use of the item; (2) the presence of at least one active and one passive element, and (3) the use of one substrate and the method of attaching the active and passive elements to the substrate. See id. at 27-28. Based on these criteria, Motorola contends that the subject merchandise are substantially identical to the earlier merchandise. b. See id. at 28. Customs Contentions Customs replies that Motorola has failed to demonstrate that the application of the PRLs creates a treatment that would trigger [19 U.S.C. § 1625(c)(2)] for any articles not specifically identified therein. Customs Mem. at 28. The guidelines of the Program provide that each PRL applies specifically to the shipments Court No. 01-00126 Page 31 of merchandise actually reviewed and encompassed within. See id. The PRLs encompass only the part numbers identified, and Motorola was obligated to update the information it submitted to Customs if it wanted to have any additional articles treated in the same manner. Id. at 29. The PRLs do not demonstrate a treatment by Customs because they apply to specific items identified therein. See id. Customs also argues that the liquidation of over 900 entries of merchandise does not establish a treatment under the statute. See id. at 29-32. Customs concedes that, in some instances, the liquidation of so many entries under a provision may constitute a treatment. See id. at 29. The facts in this case, however, do not establish such a finding. See id. The entries liquidated between May 1995, and May 1997, were on bypass status and did not involve any action by a Customs official. See id. at 30. Customs also notes that the facts of this case are different from those in Precision, 24 CIT at 1039-44, 116 F. Supp. at 1373-78, which Motorola cites in support of its argument. Customs points out that in Precision, 24 CIT at 1039-44, 116 F. Supp. at 1373-78, 69 drawback claims were granted because of actions performed by Customs. See Customs Mem. at 30. In the case at bar, however, Customs did not take any action because over 900 entries were on bypass status and not reviewed prior to liquidation. See id. Court No. 01-00126 Customs Page 32 further contends that the regulations for the implementation of 19 U.S.C. § 1625(c) were recently amended to exclude the consideration of bypass entries for section 1625(c)(2) purposes. See id. Under the new regulation, Customs will give no weight whatsoever to informal entries and to other entries or transactions which Customs, in the interest of commercial facilitation and accommodation, processes expeditiously and without examination or Customs officer review. 177.12(c)(ii) (2003)). Id. (quoting 19 C.F.R. § Customs acknowledges that the subject merchandise was entered prior to the amendment, yet Customs argues that the Court should accord the highest degree of deference to this amendment. Id. Customs maintains that the regulation is entitled to Chevron deference, and notes that in Smiley v. Citibank (South Dakota), N.A., 517 U.S. 735 (1995), a regulation was entitled to Chevron deference even though it had been enacted after the initiation of the lawsuit. See Customs Mem. at 31. Consequently, Customs asserts that the Court should not consider the 900 entries, which were on bypass status, in determining whether Motorola has established a treatment of its merchandise as hybrid integrated circuits. Id. at 32. Customs concedes that if there was a treatment pursuant to 19 U.S.C. § 1625(c)(2), then four of the eight articles in issue are substantially identical to at least some of the articles Court No. 01-00126 Page 33 provided by Motorola to [Customs] for comparison purposes. Id. at 33. Citing the dictionary, Customs argues that the remaining four articles are not substantially identical to the merchandise submitted for comparison, unless they essential characters or features. have Id. at 34. almost the same Customs maintains that the four articles at issue do not pass this test and notes that Motorola wants the Court to take the most expansive view possible when comparing the imported circuit assemblies and ignore the significant differences in function among these articles. Court to reject Motorola s technology, Id. at 35. interpretation construction and Customs urges the because of the differences between the four articles at issue, which are used with lithium-ion battery cells (the Lithium-ion Assemblies ), and those submitted by Motorola for comparison, which are used with nickel based batteries (the Nickel Assemblies ). See id. at 35-37. Based on these differences, Customs requests the Court follow the opinion of [Customs ] expert and find that the importations of four of the eight articles in issue are not substantially identical transactions to importations of any other flexible circuit assemblies relied on by Motorola for purposes of establishing a treatment under 19 U.S.C. § 1625(c)(2). 2. Id. at 37-38. Analysis To demonstrate a violation of 19 U.S.C. § 1625(c)(2), Motorola Court No. 01-00126 Page 34 must show that HQ 961050 was an interpretive ruling or decision which modified a treatment previously accorded by Customs to substantially identical transactions. Motorola must show that Customs failed to follow the notice and comment process outlined in the statute. It is uncontested that HQ 961050 is an interpretive ruling or decision and that it was not published in the Customs Bulletin. Consequently, the Court must determine whether Customs afforded a treatment to substantially identical transactions. First, the Court finds that Motorola has successfully demonstrated that Customs liquidation of over 900 entries was a treatment under the statute. In determining the meaning of a term that is undefined in a statute, the Court normally gives such term its ordinary, contemporary, common meaning. See Perrin v. United States, 444 U.S. 37, 42 (1979); see also Precision, 24 CIT at 1042, 116 F. Supp. at 1376. The Court has previously noted that the ordinary definition of the term treatment includes words such as often , customarily and pattern all terms which necessitate multiple occurrences. F. Supp. 2d at 1376. The term treatment signifies a pattern or some form of customary practice. term treatment Precision, 24 CIT at 1042, 116 with reference See id. to The statute uses the substantially identical transactions, which indicates that a single antecedent transaction is not enough to trigger the statute. See Precision, 24 CIT at Court No. 01-00126 1043, 116 F. Page 35 Supp. 2d at 1376-77. Moreover, [t]he term treatment looks to the actions of Customs, rather than its position or policy. 8 In the case at Id. (emphasis in original). bar, Customs concedes that so many liquidations under a claimed provision might, in some cases, create a treatment for 19 U.S.C. § 1625(c)(2) purposes. at 29. Customs Mem. Customs argues, however, that the circumstances presented here do not warrant such a finding. Id. Customs notes that the over 900 entries liquidated between May 1995, and May 1997, were on bypass status and, performed by Customs. disagrees. therefore, did not See id. at 30. involve any action The Court, however, As the Court has previously noted, Customs uses its bypass procedures to manage its workload, and reviews the entries tariff classification for accuracy. G&R Produce Company v. United States, 27 CIT ___, ___, 281 F. Supp. 2d 1323, 1333 (2003). Moreover, although the entries are on bypass status, Customs 8 The term position is defined as a practice or policy which entails a conscious decision by Customs. Precision, 24 CIT at 1043, 116 F. Supp. 2d at 1377. The treatment afforded an item is not related to the position taken by Customs, but rather is just an indicia of how the item was treated or afforded in the past by Customs. See id. Accordingly, a treatment [or action] may be found where a position [or policy might not [] the definition of treatment does not require publication or liquidation among many ports over many years. Id. Court No. 01-00126 Page 36 continues to randomly sample and review them for accuracy.9 id. See Accordingly, the Court finds that the liquidation of over 900 entries of merchandise, which are on bypass status, require Customs to act and constitute a treatment for purposes of the statute. Although 19 C.F.R. § 177.12(c)(ii) was promulgated after the commencement of the current litigation, Customs argues that the Court may still consider it in deciding the case at bar. See Customs Mem. the at 30-32. Moreover, Customs asserts that relevant regulation is entitled to Chevron deference because the statute is silent or ambiguous with respect to the specific issue, and Customs interpretation is a permissible construction of the statute. See id. (citing Chevron, 467 U.S. at 842). however, does not agree with Customs. The Court, The regulation does not deserve Chevron deference because the statute directly speaks to 9 Customs mischaracterizes what bypass status means in stating that the vast majority of the entries [in G&R Produce, 27 CIT ___, 281 F. Supp. 2d 1323 (2003),] were bypass entries, meaning that the entries were filed electronically and no Customs official had actually reviewed them prior to liquidation. Customs Reply at 13-14 (emphasis added). The Court points out that [i]n order to place entries on bypass, Customs reviews the entries tariff classification for accuracy. G&R Produce, 27 CIT at ___, 281 F. Supp. 2d at 1333. To place an entry on bypass status requires Customs to perform some action in reviewing an entry s tariff classification. Court No. 01-00126 Page 37 the precise question at issue.10 In Chevron, 467 U.S. at 842, the United States Supreme Court set forth a two-prong analysis that governs the degree of judicial deference for agency interpretations of statutes, which the agency is charged with administering. Under Chevron, the first question for the Court is whether Congress has directly spoken to the precise question at issue. 467 U.S. at 842. If the Court finds that the intent of Congress is clear, that is the end of the matter; for the court, as well as the agency, must give effect to the unambiguously expressed intent of Congress. Id. at 842-43. With respect to 19 U.S.C. § 1625(c)(2), the Court finds that the intent of Congress is clear on its face and that the statute is not silent or ambiguous. See Precision, 24 CIT at 1040, 116 F. Supp. 2d at 1374 (stating that [t]he lack of any specific legislative history [for 19 U.S.C. § 1625(c)], however, does not eliminate this court s duty to employ the plain meaning of the language that the Congress adopted ). Congress has neither explicitly nor implicitly left a gap to be filled by Customs because the meaning of the term treatment is not ambiguous. See Chevron, 467 U.S. at 842. Accordingly, Customs statutory interpretation in 19 C.F.R. § 10 Customs regulation interprets the term treatment used in 19 U.S.C. § 1625(c)(2). Because such interpretation is not permissible under Chevron, the Court will not address whether a new regulation should have an effect on the outcome of litigation initiated prior to the issuance of such regulation. Court No. 01-00126 Page 38 177.12(c)(ii) is not based on a permissible construction of the statute and, therefore, the regulation is not entitled to Chevron deference. Second, although the liquidation of over 900 entries constitutes a treatment for purposes of 19 U.S.C. § 1625(c)(2), Motorola has failed to fully demonstrate that such treatment was accorded by Customs to substantially identical transactions. Customs concedes that four of the eight subject merchandise11 are substantially identical to the articles submitted by Motorola for comparison purposes. See Customs Mem. at 33. The Court agrees with Motorola that there is no dispute that the nickel-chemistry based [subject merchandise] are substantially identical to the nickel-chemistry based [hybrid integrated circuits] in the PRLs and the [hybrid integrated circuits] imported between May 1995 to May 1997. Motorola s Mem. at 25. Customs violated the statute with respect to the four Nickel Assemblies by failing to publish HQ 961050 because it was an interpretive ruling or decision that modified or revoked a treatment Customs previously accorded to substantially identical transactions. With respect to the remaining four Lithium-ion Chemistry Assemblies, the Court finds that Customs did not violate the 11 These are part numbers 5108189Z16, 5180569A02, 5104035T03 and 5180569A03. See Customs Mem. Ex. 4. Court No. 01-00126 statute. Page 39 Motorola correctly asserts that to determine whether substantially identical transactions substantial and not exact. exist, the Motorola s Mem. at 25. test is The plain meaning of the phrase substantially identical can be discerned from the dictionary definitions of each term. See Perrin, 444 U.S. at 42. The considerable term substantial importance, value, is defined degree, as amount, [b]eing or of extent. Webster s II New Riverside University Dictionary 1155 (1988). The term identical is defined as [b]eing the same[,] exactly equal and alike[,] [h]aving such similarity or near resemblance as to be fundamentally equal or interchangeable. Id. at 607. Motorola asserts that the criteria for determining substantial identity is (1) the use and function of an item; (2) the presence of at least one active and one passive element; (3) the use of one substrate; and, (4) the method of attaching the active and passive elements to the substrate. See Motorola s Mem. at 27-28. The Court does not agree because such criteria do not meet the definitions of the terms substantially identical. Although the Litium-ion Chemistry Assemblies and the Nickel Assemblies may be made in much the same manner and serve similar purposes, the two sets of assemblies fall short of being identical. The definition of the term identical requires the two assemblies to have such similarity or near resemblance as to be fundamentally Court No. 01-00126 Page 40 equal or interchangeable. Webster s II at 607. The record indicates that the Lithium-ion Chemistry Assemblies and the Nickel Assemblies are not fundamentally significant differences. equal because they have Principally, one set of assemblies are used with litium-ion battery cells while the others are used with nickel-based batteries. Consequently, Customs did not violate 19 U.S.C § 1625(c)(2) with respect to the Lithium-ion Chemistry Assemblies. CONCLUSION The Court finds that Customs properly classified the subject merchandise under heading 8536 of the HTSUS. failure to 1625(c)(1). publish HQ Although 916050 the PRLs did are not Moreover, Customs violate interpretive 19 U.S.C. rulings § or decisions, HQ 916050 deals with merchandise that is not identified in the PRLs. Accordingly, HQ 916050 did not modify or revoke a prior interpretive ruling or decision. The Court, however, finds that Customs violated 19 U.S.C. § 1625(c)(2) with respect to the Nickel Assemblies but not the Lithium-ion Chemistry Assemblies. Accordingly, Motorola s motion for summary judgment is granted in part and denied in part, and Customs cross-motion for summary Court No. 01-00126 Page 41 judgment is granted in part and denied in part. Judgment shall be entered accordingly. /s/ Nicholas Tsoucalas NICHOLAS TSOUCALAS SENIOR JUDGE Dated: August 13, 2004 New York, New York

Some case metadata and case summaries were written with the help of AI, which can produce inaccuracies. You should read the full case before relying on it for legal research purposes.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.