2011 Nevada Revised Statutes
Chapter 392 - Pupils
NRS 392.405 - Standards for new school buses purchased by school district on and after January 1, 2014.

On and after January 1, 2014, with respect to any new school bus which is purchased by a school district to transport pupils, the school bus must meet the following standards in addition to being equipped as required by the regulations of the State Board:

1. Occupant seating within the school bus must be tested in accordance with either:

(a) The ASTM International Standard ASTM E1537, Standard Test Method for Fire Testing of Upholstered Furniture ; or

(b) The School Bus Seat Upholstery Fire Block Test established by the National School Transportation Specifications and Procedures adopted at the most recent National Congress on School Transportation.

2. For the purposes of subsection 1, such testing must be conducted on a complete seat assembly inside a test room or school bus, and occupant seating shall be deemed to have failed the ASTM E1537 test or Fire Block Test, as applicable, if:

(a) The seat assembly exhibits a weight loss of 3 pounds or greater during the first 10 minutes of the test; or

(b) The seat assembly exhibits a heat release rate of 80 kilowatts or greater.

3. Each plastic component contained in the engine compartment of a new school bus which is purchased by a school district on and after July 1, 2014, to transport pupils must meet a V-0 classification when tested in accordance with the Underwriters Laboratories Inc. Standard 94, the Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances testing.

(Added to NRS by 2011, 470)