2013 Maryland Code
PUBLIC SAFETY
§ 12-905 - Regulations for boilers and pressure vessels


MD Pub Safety Code § 12-905 (2013) What's This?

§12-905.

(a) The Board shall formulate regulations for the safe construction, use, installation, maintenance, repair, and inspection of boilers and pressure vessels in the State.

(b) The regulations formulated by the Board shall conform as nearly as possible to the requirements of:

(1) this subtitle; and

(2) the following codes as amended and interpreted:

(i) the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers;

(ii) the Inspection Code of the National Board of Boiler and Pressure Vessel Inspectors;

(iii) the Code for Power Piping, B31.1 of the American Society of Mechanical Engineers;

(iv) the Code for Controls and Safety Devices for Automatically Fired Boilers, CSD-1 of the American Society of Mechanical Engineers;

(v) NFPA 85 Boiler and Combustion Systems Hazards Code; and

(vi) the Code for Chemical Plant and Petroleum Refinery Piping, B31.3 of the American Society of Mechanical Engineers.

(c) The regulations formulated by the Board may be adopted by the Commissioner subject to the approval of the Secretary.

(d) The Board and the Commissioner shall submit proposed amendments to regulations adopted under this subtitle to be consistent with the Maryland Building Rehabilitation Code within 90 days after any amendments to the Maryland Building Rehabilitation Code are adopted by the Department of Housing and Community Development under Subtitle 10 of this title.

Disclaimer: These codes may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.