2020 Wyoming Statutes
Title 31 - Motor Vehicles
Chapter 5 - Regulation of Traffic on Highways
Article 5 - Stopping, Standing and Parking
Section 31-5-510 - Railroad Crossings Generally.

Universal Citation: WY Stat § 31-5-510 (2020)

31-5-510. Railroad crossings generally.

(a) Whenever any person driving a vehicle approaches a railroad grade crossing under any of the circumstances stated in this section, the driver of the vehicle shall stop within fifty (50) feet but not less than fifteen (15) feet from the nearest rail of the railroad, and shall not proceed until he can do so safely. The foregoing requirements apply when:

(i) A clearly visible electric or mechanical signal device gives warning of the immediate approach of a railroad train or other on-track equipment;

(ii) A crossing gate is lowered or a flagman gives or continues to give a signal of the approach or passage of a railroad train or other on-track equipment;

(iii) A railroad train or other on-track equipment approaching a highway crossing emits an audible signal in accordance with federal railroad administration requirements and the railroad train or other on-track equipment, by reason of its speed or nearness to the crossing, is an immediate hazard;

(iv) An approaching railroad train or other on-track equipment is plainly visible and is in hazardous proximity to the crossing.

(b) No person shall drive any vehicle through, around, or under any crossing gate or barrier at a railroad crossing while the gate or barrier is closed or is being opened or closed.

Disclaimer: These codes may not be the most recent version. Wyoming may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.