2013 Code of Virginia
Title 46.2 - MOTOR VEHICLES.
Chapter 10 - Motor Vehicle and Equipment Safety
Section 46.2-1093 - Requirements for safety lap belts, shoulder harnesses and combinations thereof


VA Code § 46.2-1093 (2013) What's This?

§ 46.2-1093. Requirements for safety lap belts, shoulder harnesses and combinations thereof.

Any safety lap belt or shoulder harness or any combination of lap belt and shoulder harness installed in a vehicle shall be designed and installed in such manner as to prevent or materially reduce movement of any person using the same in the event of collision or upset of the vehicle.

The Superintendent shall establish specifications or requirements for approved type safety lap belts and shoulder harnesses or any combination of lap belt and shoulder harness, attachments, and installation, in accordance with the provisions of this section. Such specifications or requirements may be the same as those specifications or requirements for safety lap belts or shoulder harnesses or any combination of lap belt and shoulder harness established by the Civil Aeronautics Administration Technical Standard Orders or regulations established by the Society of Automotive Engineers or the standards of the federal Department of Transportation, for safety lap belts and shoulder harnesses or combination of lap belts and shoulder harnesses.

No person shall sell or offer for sale any safety lap belt, shoulder harness, or any combination of lap belt and shoulder harness or attachments thereto for use in a vehicle, unless of a type which has been approved by the Superintendent.

(Code 1950, § 46-312.1; 1956, c. 36; 1958, c. 541, § 46.1-310; 1966, c. 37; 1968, c. 171; 1970, c. 20; 1989, c. 727.)

Disclaimer: These codes may not be the most recent version. Virginia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.