Go to Previous Versions
of
this Section
2024 Utah Code
Title 58 - Occupations and Professions
Chapter 55 - Utah Construction Trades Licensing Act
Part 3 - Licensing
Section 302.5 - Continuing education requirements for contractor licensees -- Continuing education courses.
Universal Citation:
UT Code § 58-55-302.5 (2024)
Learn more
This media-neutral citation is based
on the American Association of Law Libraries Universal Citation Guide and is not
necessarily the official citation.
Effective 5/1/2024
58-55-302.5. Continuing education requirements for contractor licensees -- Continuing education courses.
Amended by Chapter 201, 2024 General Session
58-55-302.5. Continuing education requirements for contractor licensees -- Continuing education courses.
- (1)
- (a)Each contractor licensee under a license issued under this chapter shall complete six hours of approved continuing education during each two-year renewal cycle established by rule under Subsection 58-55-303(1).
- (b)Each contractor licensee who has a renewal cycle that ends on or after January 1, 2020, may complete one hour of approved continuing education on energy conservation as part of the six required hours.
- (2)
- (a)The commission shall, with the concurrence of the division, establish by rule made in accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking Act, a program of approved continuing education for contractor licensees.
- (b)Except as provided in Subsections (2)(c) and (e), only courses offered by any of the following may be included in the program of approved continuing education for contractor licensees:
- (i)the Associated General Contractors of Utah;
- (ii)Associated Builders and Contractors, Utah Chapter;
- (iii)the Utah Home Builders Association;
- (iv)the National Electrical Contractors Association Intermountain Chapter;
- (v)the Utah Plumbing & Heating Contractors Association;
- (vi)the Independent Electrical Contractors of Utah;
- (vii)the Rocky Mountain Gas Association;
- (viii)the Utah Mechanical Contractors Association;
- (ix)the Sheet Metal Contractors Association;
- (x)the Intermountain Electrical Association;
- (xi)the American Subcontractors Association, Utah Chapter; or
- (xii)Utah Roofing Contractors Association.
- (c)An approved continuing education program for a contractor licensee may include a course approved by an entity described in Subsections (2)(b)(i) through (2)(b)(iii).
- (d)
- (i)Except as provided in Subsections (2)(d)(ii) and (iii), an entity listed in Subsections (2)(b)(iv) through (2)(b)(xii) may only offer and market continuing education courses to a licensee who is a member of the entity.
- (ii)An entity described in Subsection (2)(b)(iv), (vi), or (x) may offer and market a continuing education course that the entity offers to satisfy the continuing education requirement described in Subsection 58-55-302.7(2)(a) to a contractor in the electrical trade.
- (iii)An entity described in Subsection (2)(b)(v) or (viii) may offer and market a continuing education course that the entity offers to satisfy:
- (A)the continuing education requirement described in Subsection 58-55-302.7(2)(b) to a contractor in the plumbing trade; or
- (B)the continuing education requirement described in Subsection (1) for a contractor licensee that is licensed in the specialty contractor classification of HVAC contractor.
- (e)An approved continuing education program for a contractor licensee may include a course offered and taught by:
- (i)a state executive branch agency;
- (ii)the workers' compensation insurance carrier that provides workers' compensation insurance under Section 31A-22-1001; or
- (iii)a nationally or regionally accredited college or university that has a physical campus in the state.
- (f)For a contractor licensee that is licensed in the specialty contractor classification of HVAC contractor, at least three of the six hours described in Subsection (1) shall include continuing education directly related to the installation, repair, or replacement of a heating, ventilation, or air conditioning system.
- (3)The division may contract with a person to establish and maintain a continuing education registry to include:
- (a)a list of courses that the division has approved for inclusion in the program of approved continuing education; and
- (b)a list of courses that:
- (i)a contractor licensee has completed under the program of approved continuing education; and
- (ii)the licensee may access to monitor the licensee's compliance with the continuing education requirement established under Subsection (1).
- (4)The division may charge a fee, as established by the division under Section 63J-1-504, to administer the requirements of this section.
Amended by Chapter 201, 2024 General Session
Disclaimer: These codes may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
