There is a newer version
of
this Section
2021 Utah Code
Title 41 - Motor Vehicles
Chapter 6a - Traffic Code
Part 11 - Bicycles and Other Vehicles, Regulation of Operation
Section 1105 - Operation of bicycle or moped on and use of roadway -- Duties, prohibitions.
Universal Citation: UT Code § 41-6a-1105 (2021)
Effective 5/5/2021
41-6a-1105. Operation of bicycle or moped on and use of roadway -- Duties, prohibitions.
Amended by Chapter 119, 2021 General Session
41-6a-1105. Operation of bicycle or moped on and use of roadway -- Duties, prohibitions.
- (1) A person operating a bicycle or a moped on a roadway at less than the normal speed of traffic at the time and place and under the conditions then existing shall ride as near as practicable to the right-hand edge of the roadway except when:
- (a) overtaking and passing another bicycle or vehicle proceeding in the same direction;
- (b) preparing to make a left turn at an intersection or into a private road or driveway;
- (c) traveling straight through an intersection that has a right-turn only lane that is in conflict with the straight through movement; or
- (d) reasonably necessary to avoid conditions that make it unsafe to continue along the right-hand edge of the roadway including:
- (i) fixed or moving objects;
- (ii) parked or moving vehicles;
- (iii) bicycles;
- (iv) pedestrians;
- (v) animals;
- (vi) surface hazards; or
- (vii) a lane that is too narrow for a bicycle and a vehicle to travel safely side by side within the lane.
- (2) A person operating a bicycle or moped on a highway shall operate in the designated direction of traffic.
- (3)
- (a) A person riding a bicycle or moped on a roadway may not ride more than two abreast with another person except on paths or parts of roadways set aside for the exclusive use of bicycles.
- (b) If allowed under Subsection (3)(a), a person riding two abreast with another person may not impede the normal and reasonable movement of traffic and shall ride within a single lane.
- (4) If a usable path for bicycles has been provided adjacent to a roadway, a bicycle rider may be directed by a traffic-control device to use the path and not the roadway.
- (5)
- (a) As used in this Subsection (5), "immediate hazard" means a vehicle approaching an intersection at a proximity and rate of speed sufficient to indicate to a reasonable person that there is a danger of collision or accident.
- (b) Except as provided in Subsection (6), an individual operating a bicycle approaching a stop sign may proceed through the intersection without stopping at the stop sign if:
- (i) the individual slows to a reasonable speed; and
- (ii) yields the right-of-way to:
- (A) any pedestrian within the intersection or an adjacent crosswalk;
- (B) other traffic within the intersection; and
- (C) oncoming traffic that poses an immediate hazard during the time the individual is traveling through the intersection.
- (6) Subsection (5)(b) does not apply to an intersection with an active railroad grade crossing as defined in Section 41-6a-1005.
Amended by Chapter 119, 2021 General Session
Disclaimer: These codes may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
