There is a newer version
of
this Section
2019 Utah Code
Title 41 - Motor Vehicles
Chapter 6a - Traffic Code
Part 16 - Vehicle Equipment
Section 1629 - Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions.
Universal Citation: UT Code § 41-6a-1629 (2019)
Effective 5/13/2014
41-6a-1629. Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions.
Amended by Chapter 229, 2014 General Session
41-6a-1629. Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions.
- (1) As used in Sections 41-6a-1629 through 41-6a-1633:
- (a) "Frame" means the main longitudinal structural members of the chassis of the vehicle or, for vehicles with unitized body construction, the lowest longitudinal structural member of the body of the vehicle.
- (b) "Frame height" means the vertical distance between the ground and the lowest point on the frame. The distance is measured when the vehicle is unladen and on a level surface.
- (c) "Gross vehicle weight rating (GVWR)" means the original manufacturer's gross vehicle weight rating, whether or not the vehicle is modified by use of parts not originally installed by the original manufacturer.
- (d) "Manufacturer" means any person engaged in manufacturing or assembling new motor vehicles utilizing new parts or components, or a person defined as a manufacturer in current applicable Federal Motor Vehicle Safety Standards and Regulations.
- (e) "Mechanical alteration" or "mechanical lift" means modification or alteration of the axles, chassis, suspension, or body by any means, including tires and wheels, and excluding any load, which affects the frame height of the motor vehicle.
- (f) "O.E.M." means original equipment manufacturer.
- (g) "Original equipment" means an item of motor vehicle equipment, including tires, which were installed in or on a motor vehicle or available as an option for the particular vehicle from the original manufacturer at the time of its delivery to the first purchaser.
- (h) "Wheel track" means the shortest distance between the center of the tire treads on the same axle. On vehicles having dissimilar axle widths, the axle with the widest distance is used for all calculations.
- (2)
- (a) Except as provided in Subsections (2)(b) and (c), the provisions of Sections 41-6a-1629 through 41-6a-1633 apply to all motor vehicles operated or parked on a highway.
- (b) The provisions of Sections 41-6a-1629 through 41-6a-1633 do not apply to the following vehicles:
- (i) implements of husbandry;
- (ii) farm tractors;
- (iii) road machinery;
- (iv) road rollers; and
- (v) historical vehicles or horseless carriages that have been restored as near to original condition as is reasonably possible.
- (c) The provisions of Subsection 41-6a-1631(2) and Sections 41-6a-1632 and 41-6a-1633 do not apply to a street-legal all-terrain vehicle operated in accordance with Section 41-6a-1509.
Amended by Chapter 229, 2014 General Session
Disclaimer: These codes may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
