2016 Utah Code
Title 41 - Motor Vehicles
Chapter 22 - Off-Highway Vehicles
Section 10.7 - Vehicle equipment requirements -- Rulemaking -- Exceptions.

UT Code § 41-22-10.7 (2016) What's This?
Effective 5/12/2015
41-22-10.7. Vehicle equipment requirements -- Rulemaking -- Exceptions.
  • (1) Except as provided under Subsection (3), an off-highway vehicle shall be equipped with:
    • (a) brakes adequate to control the movement of and to stop and hold the vehicle under normal operating conditions;
    • (b) headlights and taillights when operated between sunset and sunrise;
    • (c) a noise control device and except for a snowmobile, a spark arrestor device; and
    • (d) when operated on sand dunes designated by the board, a safety flag that is:
      • (i) red or orange in color;
      • (ii) a minimum of six by 12 inches; and
      • (iii) attached to:
        • (A) the off-highway vehicle so that the safety flag is at least eight feet above the surface of level ground; or
        • (B) the protective headgear of a person operating a motorcycle so that the safety flag is at least 18 inches above the top of the person's head.
  • (2) A violation of Subsection (1) is an infraction.
  • (3) In accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking Act, the board may make rules which set standards for the equipment and which designate sand dunes where safety flags are required under Subsection (1).
  • (4) An off-highway implement of husbandry used only in agricultural operations and not operated on a highway, is exempt from the provisions of this section.


Amended by Chapter 412, 2015 General Session

Disclaimer: These codes may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.