2006 Utah Code - 41-6a-1613 — Lamp required for operation of vehicle on highway or adjacent shoulder -- Dimming of lights.

     41-6a-1613.   Lamp required for operation of vehicle on highway or adjacent shoulder -- Dimming of lights.
     (1) (a) If a vehicle is operated on a highway or shoulder adjacent to the highway under the conditions specified under Subsection 41-6a-1603(1)(a), the operator of a vehicle shall use a high or low beam distribution of light or composite beam except as provided under Subsection (1)(c).
     (b) Except as provided under Subsection (1)(c), the distribution of light or composite beam shall be directed high enough and of sufficient intensity to reveal persons and vehicles at a safe distance in advance of the vehicle.
     (c) The operator of a vehicle shall use a low beam distribution of light or composite beam if the vehicle approaches:
     (i) an oncoming vehicle within 500 feet; or
     (ii) another vehicle from the rear within 300 feet.
     (2) (a) The low beam distribution of light or composite beam shall be aimed to avoid projecting glaring rays into the:
     (i) eyes of an oncoming operator; or
     (ii) rearview mirror of a vehicle approached from the rear.
     (b) A vehicle is not in violation of Subsection (2)(a) if:
     (i) the vehicle has not been significantly altered from the original vehicle manufacturer's specifications; or
     (ii) the glaring rays result from road contour or a temporary load on the vehicle.

Renumbered and Amended by Chapter 2, 2005 General Session

Disclaimer: These codes may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.