2013 US Code
Title 10 - Armed Forces
Subtitle B - Army (§§ 3001 - 4842)
Part IV - SERVICE, SUPPLY, AND PROCUREMENT (§§ 4501 - 4842)
Chapter 433 - PROCUREMENT (§§ 4531 - 4544)
Section 4543 - Army industrial facilities: sales of manufactured articles or services outside Department of Defense

View Metadata
Metadata
Publication TitleUnited States Code, 2012 Edition, Supplement 1, Title 10 - ARMED FORCES
CategoryBills and Statutes
CollectionUnited States Code
SuDoc Class NumberY 1.2/5:
Contained WithinTitle 10 - ARMED FORCES
Subtitle B - Army
PART IV - SERVICE, SUPPLY, AND PROCUREMENT
CHAPTER 433 - PROCUREMENT
Sec. 4543 - Army industrial facilities: sales of manufactured articles or services outside Department of Defense
Containssection 4543
Date2013
Laws in Effect as of DateJanuary 16, 2014
Positive LawYes
Dispositionstandard
Source CreditAdded Pub. L. 103-160, div. A, title I, §158(a)(1), Nov. 30, 1993, 107 Stat. 1581; amended Pub. L. 103-337, div. A, title I, §141, Oct. 5, 1994, 108 Stat. 2688.
Statutes at Large References107 Stat. 1581, 1582
108 Stat. 2688
111 Stat. 1652
113 Stat. 533
115 Stat. 1029
116 Stat. 2473
118 Stat. 2019
Public Law ReferencesPublic Law 103-160, Public Law 103-337, Public Law 105-85, Public Law 106-65, Public Law 107-107, Public Law 107-314, Public Law 108-375

Download PDF


Army industrial facilities: sales of manufactured articles or services outside Department of Defense - 10 U.S.C. § 4543 (2013)
§4543. Army industrial facilities: sales of manufactured articles or services outside Department of Defense

(a) Authority To Sell Outside DOD.—Regulations under section 2208(h) of this title shall authorize a working-capital funded Army industrial facility (including a Department of the Army arsenal) that manufactures large caliber cannons, gun mounts, recoil mechanisms, ammunition, munitions, or components thereof to sell manufactured articles or services to a person outside the Department of Defense if—

(1) in the case of an article, the article is sold to a United States manufacturer, assembler, developer, or other concern—

(A) for use in developing new products;

(B) for incorporation into items to be sold to, or to be used in a contract with, an agency of the United States;

(C) for incorporation into items to be sold to, or to be used in a contract with, or to be used for purposes of soliciting a contract with, a friendly foreign government; or

(D) for use in commercial products;


(2) in the case of an article, the purchaser is determined by the Department of Defense to be qualified to carry out the proposed work involving the article to be purchased;

(3) the sale is to be made on a basis that does not interfere with performance of work by the facility for the Department of Defense or for a contractor of the Department of Defense;

(4) in the case of services, the services are related to an article authorized to be sold under this section and are to be performed in the United States for the purchaser;

(5) the Secretary of the Army determines that the articles or services are not available from a commercial source located in the United States;

(6) the purchaser of an article or service agrees to hold harmless and indemnify the United States, except in a case of willful misconduct or gross negligence, from any claim for damages or injury to any person or property arising out of the article or service;

(7) the article to be sold can be manufactured, or the service to be sold can be substantially performed, by the industrial facility with only incidental subcontracting;

(8) it is in the public interest to manufacture such article or perform such service; and

(9) the sale will not interfere with performance of the military mission of the industrial facility.


(b) Additional Requirements.—The regulations shall also—

(1) require that the authority to sell articles or services under the regulations be exercised at the level of the commander of the major subordinate command of the Army with responsibility over the facility concerned;

(2) authorize a purchaser of articles or services to use advance incremental funding to pay for the articles or services; and

(3) in the case of a sale of commercial articles or commercial services in accordance with subsection (a) by a facility that manufactures large caliber cannons, gun mounts, or recoil mechanisms, or components thereof, authorize such facility—

(A) to charge the buyer, at a minimum, the variable costs that are associated with the commercial articles or commercial services sold;

(B) to enter into a firm, fixed-price contract or, if agreed by the buyer, a cost reimbursement contract for the sale; and

(C) to develop and maintain (from sources other than appropriated funds) working capital to be available for paying design costs, planning costs, procurement costs, and other costs associated with the commercial articles or commercial services sold.


(c) Relationship to Arms Export Control Act.—Nothing in this section shall be construed to affect the application of the export controls provided for in section 38 of the Arms Export Control Act (22 U.S.C. 2778) to items which incorporate or are produced through the use of an article sold under this section.

(d) Definitions.—In this section:

(1) The term "commercial article" means an article that is usable for a nondefense purpose.

(2) The term "commercial service" means a service that is usable for a nondefense purpose.

(3) The term "advance incremental funding", with respect to a sale of articles or services, means a series of partial payments for the articles or services that includes—

(A) one or more partial payments before the commencement of work or the incurring of costs in connection with the production of the articles or the performance of the services, as the case may be; and

(B) subsequent progress payments that result in full payment being completed as the required work is being completed.


(4) The term "variable costs", with respect to sales of articles or services, means the costs that are expected to fluctuate directly with the volume of sales and—

(A) in the case of articles, the volume of production necessary to satisfy the sales orders; or

(B) in the case of services, the extent of the services sold.

(Added Pub. L. 103–160, div. A, title I, §158(a)(1), Nov. 30, 1993, 107 Stat. 1581; amended Pub. L. 103–337, div. A, title I, §141, Oct. 5, 1994, 108 Stat. 2688.)

AMENDMENTS

1994—Subsec. (a). Pub. L. 103–337 struck out "nondefense-related commercial" after "sell manufactured" in introductory provisions and added pars. (5) to (9).

REGULATIONS

Pub. L. 103–160, div. A, title I, §158(c), Nov. 30, 1993, 107 Stat. 1582, provided that: "Regulations under subsection (b) of section 4543 of title 10, United States Code, as added by subsection (a), shall be prescribed not later than 30 days after the date of the enactment of this Act [Nov. 30, 1993]."

PILOT PROGRAM ON SALES OF MANUFACTURED ARTICLES AND SERVICES OF CERTAIN ARMY INDUSTRIAL FACILITIES WITHOUT REGARD TO AVAILABILITY FROM DOMESTIC SOURCES

Pub. L. 107–314, div. A, title I, §111(c), Dec. 2, 2002, 116 Stat. 2473, provided that: "The Inspector General of the Department of Defense shall review the experience under the pilot program carried out under such section 141 [section 141 of Pub. L. 105–85, set out as a note below] and, not later than July 1, 2003, submit to Congress a report on the results of the review. The report shall contain the views, information, and recommendations called for under subsection (d) of such section (as redesignated by subsection (b)(2)). In carrying out the review and preparing the report, the Inspector General shall take into consideration the report submitted to Congress under such subsection (as so redesignated)."

Pub. L. 105–85, div. A, title I, §141, Nov. 18, 1997, 111 Stat. 1652, as amended by Pub. L. 106–65, div. A, title I, §115, Oct. 5, 1999, 113 Stat. 533; Pub. L. 107–107, div. A, title I, §112, Dec. 28, 2001, 115 Stat. 1029; Pub. L. 107–314, div. A, title I, §111(a), (b), Dec. 2, 2002, 116 Stat. 2473; Pub. L. 108–375, div. A, title VIII, §844, Oct. 28, 2004, 118 Stat. 2019, provided that:

"(a) Pilot Program Required.—During fiscal years 1998 through 2009, the Secretary of the Army shall carry out a pilot program to test the efficacy and appropriateness of selling manufactured articles and services of Army industrial facilities under section 4543 of title 10, United States Code, without regard to the availability of the articles and services from United States commercial sources. In carrying out the pilot program, the Secretary may use articles manufactured at, and services provided by, not more than three Army industrial facilities, except that during fiscal year 2002 the Secretary may only use articles manufactured at, and services provided by, not more than one Army industrial facility.

"(b) Temporary Waiver of Requirement for Determination of Unavailability From Domestic Source.—Under the pilot program, the Secretary of the Army is not required under section 4543(a)(5) of title 10, United States Code, to determine whether an article or service is available from a commercial source located in the United States in the case of any of the following sales for which a solicitation of offers is issued during the period during which the pilot program is being conducted:

"(1) A sale of articles to be incorporated into a weapon system being procured by the Department of Defense.

"(2) A sale of services to be used in the manufacture of a weapon system being procured by the Department of Defense.

"(c) Transfer of Certain Sums.—For each Army industrial facility participating in the pilot program that sells manufactured articles and services in a total amount in excess of $20,000,000 in any fiscal year, the amount equal to one-half of one percent of such total amount shall be transferred from the sums in the Army Working Capital Fund for unutilized plant capacity to appropriations available for the following fiscal year for the demilitarization of conventional ammunition by the Army.

"(d) Review by Inspector General.—The Inspector General of the Department of Defense shall review the experience under the pilot program under this section and, not later than July 1, 1999, submit to Congress a report on the results of the review. The report shall contain the following:

"(1) The Inspector General's views regarding the extent to which the waiver under subsection (b) enhances the opportunity for United States manufacturers, assemblers, developers, and other concerns to enter into or participate in contracts and teaming arrangements with Army industrial facilities under weapon system programs of the Department of Defense.

"(2) The Inspector General's views regarding the extent to which the waiver under subsection (b) enhances the opportunity for Army industrial facilities referred to in section 4543(a) of title 10, United States Code, to enter into or participate in contracts and teaming arrangements with United States manufacturers, assemblers, developers, and other concerns under weapon system programs of the Department of Defense.

"(3) The Inspector General's views regarding the effect of the waiver under subsection (b) on the ability of small businesses to compete for the sale of manufactured articles or services in the United States in competitions to enter into or participate in contracts and teaming arrangements under weapon system programs of the Department of Defense.

"(4) Specific examples under the pilot program that support the Inspector General's views.

"(5) Any other information that the Inspector General considers pertinent regarding the effects of the waiver of section 4543(a)(5) of title 10, United States Code, under the pilot program on opportunities for United States manufacturers, assemblers, developers, or other concerns, and for Army industrial facilities, to enter into or participate in contracts and teaming arrangements under weapon system programs of the Department of Defense.

"(6) Any recommendations that the Inspector General considers appropriate regarding continuation or modification of the policy set forth in section 4543(a)(5) of title 10, United States Code."

Disclaimer: These codes may not be the most recent version. The United States Government Printing Office may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the US site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.