2010 Tennessee Code
Title 55 - Motor and Other Vehicles
Chapter 8 - Operation of VehiclesRules of the Road
55-8-112 - Flashing signals.
55-8-112. Flashing signals.
(a) Whenever an illuminated flashing red or yellow signal is used in a traffic sign or signal, it shall require obedience by vehicular traffic as follows:
(1) Flashing red (stop signal). When a red lens is illuminated with rapid intermittent flashes, and the light is clearly visible for a sufficient distance ahead to permit stopping, drivers of vehicles shall stop before entering the nearest crosswalk at an intersection or at a limit line when marked, or, if none, then before entering the intersection, and the right to proceed shall be subject to the rules applicable after making a stop at a stop sign; and
(2) Flashing yellow (caution signal). When a yellow lens is illuminated with rapid intermittent flashes, drivers of vehicles may proceed through the intersection or past the signal only with caution.
(b) This section shall not apply at railroad grade crossings. Conduct of drivers of vehicles approaching railroad grade crossings shall be governed by the rules as set forth in § 55-8-145.
[Acts 1955, ch. 329, § 11; T.C.A., § 59-812.]
Disclaimer: These codes may not be the most recent version. Tennessee may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
