2012 South Carolina Code of Laws
Title 56 - Motor Vehicles
Chapter 5 - UNIFORM ACT REGULATING TRAFFIC ON HIGHWAYS
Section 56-5-2725 - Moving heavy equipment at railroad grade crossings.

(a) No person shall operate or move any crawler-type tractor, steam shovel, derrick, roller or any equipment or structure having a normal operating speed of ten or less miles per hour or a vertical body or load clearance of less than one-half inch per foot of the distance between any two adjacent axles or in any event of less than nine inches, measured above the level surface of a roadway, upon or across any tracks at a railroad grade crossing without first complying with this section.

(b) Notice of such intended crossing shall be given to a station agent of the railroad and a reasonable time shall be given to the railroad to provide proper protection at the crossing.

(c) Before making any such crossing, the person operating or moving the vehicle or equipment shall first stop not less than fifteen feet nor more than fifty feet from the nearest rail of the railroad and while stopped shall listen and look in both directions along the track for any approaching train and for signals indicating the approach of a train, and shall not proceed until the crossing can be made safely.

(d) No such crossing shall be made when warning is given by automatic signal or crossing gates or a flagman or otherwise of the immediate approach of a railroad train or car. If a flagman is provided by the railroad, movement over the crossing shall be under his direction.

HISTORY: 1979 Act No. 105 Section 7.