2009 North Carolina Code
Chapter 20 - Motor Vehicles.
§ 20-183.4D. Procedure when a vehicle is inspected.

§ 20‑183.4D.  Procedure when a vehicle is inspected.

(a)        Receipt. – When a safety inspection mechanic or an emissions inspection mechanic inspects a vehicle, the mechanic must give the person who brought the vehicle in for inspection an inspection receipt. The inspection receipt must state the date of the inspection, identify the mechanic performing the inspection, identify the station or self‑inspector where the inspection was performed, and list the components of the inspection performed and indicate for each component whether the vehicle passed or failed. A vehicle that fails a component of an inspection may be repaired at any repair facility chosen by the owner or operator of the vehicle.

(b)        Electronic Inspection Authorization. – When a vehicle that is subject to a safety inspection only passes the safety inspection, the safety inspection mechanic who performed the inspection must issue an electronic inspection authorization to the vehicle at the place designated by the Division. When a vehicle that is subject to both a safety inspection and an emissions inspection passes both inspections or passes the safety inspection and has a waiver for the emissions inspection, the emissions mechanic performing the inspection must issue an electronic inspection authorization to the vehicle at the place designated by the Division.

(c),       (d) Repealed by Session Law 2007‑503, s. 6, effective October 1, 2008.

(e)        When Electronic Inspection Authorization Expires. – An electronic inspection authorization issued under this Part expires at midnight of the last day of the month designated by the vehicle registration sticker of the following year. (1993 (Reg. Sess., 1994), c. 754, s. 1; 2007‑503, s. 6.)