2018 New Mexico Statutes
Chapter 25 - Food
Article 7A - Dairy Products
Section 25-7A-12 - Manufacturing, packing and processing permits for certain classes of dairy products; suspension; inspections.

Universal Citation: NM Stat § 25-7A-12 (2018)
25-7A-12. Manufacturing, packing and processing permits for certain classes of dairy products; suspension; inspections.

A. Whenever the board finds after investigation that the distribution in New Mexico of any class of dairy product may, by reason of contamination with microorganisms during manufacture, processing or packing in any locality, be injurious to health and that such injurious nature cannot be adequately determined after the dairy product has entered commerce, it then and in such case only shall promulgate regulations providing for the issuance, by the director to manufacturers, processors or packers of such class of dairy product in such locality, of permits to which shall be attached such conditions governing the manufacture, processing or packing of such class of dairy product for such temporary period of time as may be necessary to protect the public health, and after the effective date of the regulations and during the temporary period, no dairy establishment shall introduce or deliver for introduction into commerce any such dairy product manufactured, processed or packed by any such manufacturer, processor or packer unless the manufacturer, processor or packer holds a permit issued by the director as provided by such regulations.

B. The director is authorized to suspend immediately upon notice any permit issued under authority of this section if it is found that any of the conditions of the permit have been violated. The holder of a permit so suspended shall be privileged at any time to apply for the reinstatement of the permit, and the director shall, immediately after prompt hearing and an inspection of the establishment, reinstate the permit if it is found that adequate measures have been taken to comply with and maintain the conditions of the permit as originally issued or as amended.

C. The director shall have access to any factory or establishment, the operator of which holds a permit from the director, for the purpose of ascertaining whether or not the conditions of the permit are being complied with, and denial of access for inspection shall be ground for suspension of the permit until access is freely given by the operator.

History: Laws 1993, ch. 188, § 12.

ANNOTATIONS

Effective dates. — Laws 1993, ch. 188 contained no effective date provision, but, pursuant to N.M. Const., art. IV, § 23, was effective June 18, 1993, 90 days after adjournment of the legislature.

Disclaimer: These codes may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.