2017 Montana Code Annotated
TITLE 61. MOTOR VEHICLES
CHAPTER 8. TRAFFIC REGULATION
Part 2. Traffic Control Devices
61-8-211. Lane use control signals
61-8-211. Lane use control signals. When lane use control signals are placed over individual lanes, the signals indicate and apply to operators of vehicles as follows:
(1) An operator of a vehicle may drive in the lane over which a steady downward green arrow signal is located.
(2) An operator of a vehicle must be prepared to vacate, in a safe manner, the lane over which a steady yellow X signal is located because a lane control change is being made to a steady red X signal.
(3) An operator of a vehicle may not use the lane over which the steady red X signal is located.
(4) An operator of a vehicle may use a lane over which a steady white two-way left-turn arrow signal is located for a left turn but not for through travel. The operator must be aware that common use of the lane by oncoming vehicular traffic is also permitted.
(5) An operator of a vehicle may use a lane over which a steady white one-way left-turn arrow signal is located for a left turn but not for through travel.
History: En. Sec. 7, Ch. 53, L. 2003.
