2006 Minnesota Code
Chapters 324 - 338 Trade Regulations, Consumer Protection
Chapter 325F Consumer Protection; Products and Sales
Section 325F.23 MARKING, LABELING, AND CONSUMER INFORMATION.

325F.23 MARKING, LABELING, AND CONSUMER INFORMATION.
Subdivision 1. Required information on containers and wrappings. The outside of all
containers and wrappings of insulation used or offered for sale in Minnesota shall have the
following information printed legibly thereon in bold type not less than one-eighth inch high:
(a) type (pneumatic or blown, pouring, batt, roll, blanket, board, cellular, or reflective);
(b) R value (to the nearest tenth) per inch at the recommended installation density;
(c) required thickness in inches to obtain four or more commonly used R values and the
corresponding coverage areas in square feet of the insulation in the container or wrapping;
(d) expiration date and expected shelf life of all resins, catalysts, and foaming agents for
all foam insulations, whether in powder, diluted or partially diluted state, on canister, drum,
container, or package. For purposes of this section, "foam insulation" means products having an
organic base or composed of vinyl or plastic material or both, which are manufactured or installed
using a process involving a foaming agent, a resin, a catalyst and an air compressor, including
but not limited to urea-formaldehyde, other urea-based foams, urethane foam, polyurethane
foam, polystyrene foam, and isocyanurate foam.
(e) name and address of the manufacturer of the insulation;
(f) a notation of those current specifications of the United States General Services
Administration, the United States Department of Energy, the United States Department of
Housing and Urban Development, the United States Consumer Product Safety Commission, the
Federal Trade Commission and the commissioner with which the insulation complies;
(g) the net weight of the contents of the bag, package, or container.
Subd. 2. Separate statement. Where insulation is used or offered for sale without the
manufacturer's container, the information required in subdivision 1 shall be provided in a separate
printed statement to the intermediate and ultimate consumers.
History: 1978 c 786 s 8; 1981 c 356 s 205