2005 Minnesota Statutes - 299G.14 — Glazing material; labeling required.

     299G.14 Glazing material; labeling required.  


    Subdivision 1.    Permanent labeling; identification; 
 standard.  Each lite of safety glazing material manufactured, 
 distributed, imported, or sold for use in hazardous locations, 
 or installed in such a location within this state shall be 
 permanently labeled by such means as etching, sandblasting, 
 firing of ceramic material, hot-die stamping, transparent 
 pressure sensitive labels, or by other suitable means.  The 
 label shall identify the seller, manufacturer, fabricator, or 
 installer, the nominal thickness and the type of safety glazing 
 material, and the fact that said material meets the test 
 requirements of the American National Standards Institute 
 Standard Z-97.1-1972.  


    The label must be legible and visible after installation.  


    Subd. 2.    Limited use.  Such safety glazing labeling 
 shall not be used on other than safety glazing materials.  


    HIST: 1974 c 53 s 2