There is a newer version
of
this Section
2018 Idaho Statutes
Title 47 - MINES AND MINING
Chapter 3 - OIL AND GAS WELLS — GEOLOGIC INFORMATION, AND PREVENTION OF WASTE
Section 47-322 - OIL AND GAS METERING SYSTEMS.
Universal Citation: ID Code § 47-322 (2018)
47-322. OIL AND GAS METERING SYSTEMS. (1) Each meter shall be properly constructed, maintained, repaired and operated to continually and accurately register the quantity of oil and gas produced from the well.
(2) The meter shall be installed, used and operated according to industry standards and guidelines promulgated by the American petroleum institute, American gas association, and the gas processors association that are in effect at the time of installation of the meter. If standards conflict, the most current American petroleum institute standard shall apply.
(3) All custody transfer meters and all allocation meters used in the allocation of custody transfer volumes shall be calibrated by a third party at least quarterly in each calendar year. The records of calibrations shall be maintained by the operator of the meter for at least five (5) years and copies shall be submitted to the department.
History:
[47-322, added 2017, ch. 271, sec. 15, p. 696.]
Disclaimer: These codes may not be the most recent version. Idaho may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
