There is a newer version
of
this Section
2018 Idaho Statutes
Title 22 - AGRICULTURE AND HORTICULTURE
Chapter 9 - POTATOES — GRADING AND PACKING
Section 22-905 - APPLICATION OF TOLERANCES.
Universal Citation: ID Code § 22-905 (2018)
22-905. APPLICATION OF TOLERANCES. All percentages shall be calculated on the basis of weight.
The tolerances for the standards are on a container basis. However, if the averages for the entire lot, based on sample inspection, are within the tolerances specified in the standards, the contents of individual packages in the lot may vary from the specified tolerances subject to the following limitations.
In packages containing over 15 specimens, when the tolerance specified is 10 percent or more, not over one tenth (1/10) of the individual packages in the lot may contain more than one and one-half (1 1/2) times the tolerance, but no package may contain more than four (4) times the tolerance for soft rot or wet breakdown.
When the tolerance specified is less than 10 percent, not over one tenth (1/10) of the individual packages in any lot may contain more than double the tolerance specified, but no package may contain more than four (4) times the tolerance for soft rot or wet breakdown.
In packages containing 15 specimens, or less, not over one tenth (1/10) of the individual packages in any lot may contain more than double any tolerance specified, except that at least one (1) defective specimen shall be permitted in a package.
History:
[22-905, added 1941, ch. 32, sec. 5, p. 72.]
Disclaimer: These codes may not be the most recent version. Idaho may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
