2005 Idaho Code - 71-117 — SEALING OR MARKING CORRECT WEIGHTS AND MEASURES

                                  TITLE  71
                             WEIGHTS AND MEASURES
                                  CHAPTER 1
                       DIVISION OF WEIGHTS AND MEASURES
    71-117.  SEALING OR MARKING CORRECT WEIGHTS AND MEASURES. The director
shall approve for use, and seal or mark with appropriate devices, such weights
and measures as he finds upon inspection and test to be "correct" as defined
in section 71-108, paragraph 12, [Idaho Code,] and shall reject and mark or
tag as "rejected" such weights and measures as he finds, upon inspection or
test, to be "incorrect" as defined in section 71-108, paragraph 12, [Idaho
Code,] but which in his best judgment are susceptible of satisfactory repair:
provided, that such sealing or marking shall not be required with respect to
such weights and measures as may be exempted therefrom by a regulation of the
director issued under the authority of section 71-111[, Idaho Code]. The
director shall condemn, and may seize and destroy, weights and measures found
to be incorrect that, in his best judgment, are not susceptible of
satisfactory repair, as provided for in section 71-308[, Idaho Code]. Weights
and measures that have been rejected may be confiscated and may be destroyed
by the director if not corrected as required by section 71-119, [Idaho  Code,]
or if used or disposed of contrary to the requirements of section 71-119,
[Idaho Code,] as provided for in section 71-308[, Idaho Code].