2021 Georgia Code
Title 44 - Property
Chapter 12 - Rights in Personalty
Article 8 - Die, Molds, Forms, and Patterns
Part 1 - In General
§ 44-12-310. Definitions

Universal Citation: GA Code § 44-12-310 (2021)

As used in this article, the term:

  1. "Customer" means any individual or entity who causes or caused a molder to fabricate, cast, or otherwise make a die, mold, form, or pattern or who provides a molder with a die, mold, form, or pattern to manufacture, assemble, cast, fabricate, or otherwise make a product or products for a customer.
  2. "Molder" means any individual or entity who fabricates, casts, or otherwise makes or uses a die, mold, form, or pattern for the purpose of manufacturing, assembling, casting, fabricating, or otherwise making a product or products for a customer. "Molder" includes, but is not limited to, a tool or die maker.
  3. "Within three years following the last prior use" shall include any three-year period following the last prior use of a die, mold, form, or pattern regardless of whether or not any portion of such period precedes July 1, 1999.

(Code 1981, §44-12-310, enacted by Ga. L. 1999, p. 862, § 1; Ga. L. 2000, p. 136, § 44.)

The 2000 amendment, effective March 16, 2000, part of an Act to revise, modernize, and correct the Code, substituted "July 1, 1999" for "July 1, 1999" at the end of paragraph (3).

Code Commission notes.

- Pursuant to Code Section 28-9-5, in 1999, "July 1, 1999" was substituted for "the effective date of this article" in paragraph (3).

Disclaimer: These codes may not be the most recent version. Georgia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.