There Is a Newer Version
of
the Georgia Code
2006 Georgia Code - 2-14-80
2-14-80. (a) The legal standard for calculating the
number of board feet in a log or in any number of logs in this
state shall be the Scribner Decimal C log rule or scale.
(b) Any sale or contract in which
settlement is based on the number of board feet in a log or any
number of logs, whether such sale or contract is verbal or written,
and in which the method of computing the number of board feet is
not stated shall be construed as being based entirely on
Scribner´s Decimal C log rule or scale. This Code section
shall not affect any contract or sale entered into prior to March
13, 1957. (c) Nothing in this
Code section shall be construed as preventing any person from
using, in lieu of the legal log rule articulated in subsection (a)
of this Code section, the actual measurement of lumber after it has
been sawed as the basis for settlement in any sale or contract
involving the necessity for determining the number of board feet.
However, if the lumber is to be measured after sawing, it must be
so stated in the sale or contract. (d) In scaling or measuring the diameter and
length of logs, any log as long as 18 feet and not as long as 34
feet shall be measured as two logs and any log 34 feet or more in
length shall be measured as three or more logs. Such a division in
length shall be done so as to figure logs as of nearly equal
lengths as possible and at the same time so as to use even feet in
lengths, unless otherwise provided by contract. (e) All fractions of inches in diameter shall be
figured as to the nearest whole inch, but when several logs have
fractions of one-half inch in the measurement of diameters, these
fractions shall be distributed as near evenly as possible by adding
and subtracting such fractions to and from the diameters in order
to figure such diameters in whole inches, unless otherwise provided
by contract.
Disclaimer: These codes may not be the most recent version. Georgia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.