2016 Colorado Revised Statutes
Title 38 - Property - Real and Personal
Real Property
Article 33.3 - Colorado Common Interest Ownership Act
Part 2 - Creation, Alteration, and Termination of Common Interest Communities
§ 38-33.3-209. Plats and maps

CO Rev Stat § 38-33.3-209 (2016) What's This?

(1) A plat or map is a part of the declaration and is required for all common interest communities except cooperatives. A map is required only for a common interest community with units having a horizontal boundary. The requirements of this section shall be deemed satisfied so long as all of the information required by this section is contained in the declaration, a map or a plat, or some combination of any two or all of the three. Each plat or map must be clear and legible. When a map is required under any provision of this article, the map, a plat, or the declaration shall contain a certification that all information required by this section is contained in the declaration, the map or a plat, or some combination of any two or all of the three.

(2) In addition to meeting the requirements of a land survey plat as set forth in section 38-51-106, each map shall show the following, except to the extent such information is contained in the declaration or on a plat:

(a) The name and a general schematic plan of the entire common interest community;

(b) The location and dimensions of all real estate not subject to development rights, or subject only to the development right to withdraw, and the location and dimensions of all existing improvements within that real estate;

(c) A legally sufficient description, which may be of the whole common interest community or any portion thereof, of any real estate subject to development rights and a description of the rights applicable to such real estate;

(d) The extent of any existing encroachments across any common interest community boundary;

(e) To the extent feasible, a legally sufficient description of all easements serving or burdening any portion of the common interest community;

(f) The location and dimensions of the vertical boundaries of each unit and that unit's identifying number;

(g) The location, with reference to established data, of the horizontal boundaries of each unit and that unit's identifying number;

(g.5) Any units in which the declarant has reserved the right to create additional units or common elements, identified appropriately;

(h) A legally sufficient description of any real estate in which the unit owners will own only an estate for years;

(i) The distance between noncontiguous parcels of real estate comprising the common interest community; and

(j) The approximate location and dimensions of limited common elements, including porches, balconies, and patios, other than the limited common elements described in section 38-33.3-202 (1) (b) and (1) (d).

(3) (Deleted by amendment, L. 93, p. 648, § 12, effective April 30, 1993.)

(4) (Deleted by amendment, L. 2007, p. 1799, § 1, effective July 1, 2007.)

(5) Unless the declaration provides otherwise, the horizontal boundaries of any part of a unit located outside of a building have the same elevation as the horizontal boundaries of the inside part and need not be depicted on the plats and maps.

(6) Upon exercising any development right, the declarant shall record an amendment to the declaration with respect to that real estate reflecting change as a result of such exercise necessary to conform to the requirements of subsections (1), (2), and (4) of this section or new certifications of maps previously recorded if those maps otherwise conform to the requirements of subsections (1), (2), and (4) of this section.

(7) Any certification of a map required by this article must be made by a registered land surveyor.

(8) The requirements of a plat or map under this article shall not be deemed to satisfy any subdivision platting requirement enacted by a county or municipality pursuant to section 30-28-133, C.R.S., part 1 of article 23 of title 31, C.R.S., or a similar provision of a home rule city, nor shall the plat or map requirements under this article be deemed to be incorporated into any subdivision platting requirements enacted by a county or municipality.

(9) Any plat or map that was recorded on or after July 1, 1998, but prior to July 1, 2007, and that satisfies the requirements of this section in effect on July 1, 2007, is deemed to have satisfied the requirements of this section at the time it was recorded.

Disclaimer: These codes may not be the most recent version. Colorado may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.