2025 California Code
Business and Professions Code - BPC
DIVISION 5 - WEIGHTS AND MEASURES
CHAPTER 14 - Fuels and Lubricants
ARTICLE 7 - Standards for Lubricating Oils and Oils Used to Lubricate Transmissions, Gears, or Axles
Section 13460.

Universal Citation:
CA Bus & Prof Code § 13460 (2025)
Learn more This media-neutral citation is based on the American Association of Law Libraries Universal Citation Guide and is not necessarily the official citation.

13460. Engine oil shall not be sold or distributed for use in an internal combustion engine unless the product conforms to the following specifications:

(a) It shall meet the engine oil requirements established by a minimum of one current API classification pursuant to the latest revision of the SAE International Standard SAE J183 for engine oil performance and engine service classification, or a minimum of one current sequence of the European Automobile Manufacturers Association (ACEA) “European Oil Specification.”

(b) It shall be free from water and suspended matter when tested by means of centrifuge, in accordance with the standard test ASTM D-2273.

(c) Any engine oil that is represented to meet SAE International SAE J183 engine oil performance and engine service classification SA must have either an acid number or base number of 0.20 mg of KOH/g as measured by ASTM International Standard Test Method D974 or equivalent.

(d) Any engine oil represented as “resource conserving” shall meet the requirements established by the latest revision of the SAE International Recommended Practice SAE J-1423.

(Amended by Stats. 2015, Ch. 591, Sec. 24. (AB 808) Effective January 1, 2016.)

Disclaimer: These codes may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.