2021 Code of Alabama
Title 32 - Motor Vehicles and Traffic.
Chapter 5A - Rules of the Road.
Article 2 - Traffic Signs, Signals and Markings.
Section 32-5A-33 - Pedestrian-Control Signals.

Universal Citation: AL Code § 32-5A-33 (2021)

Section 32-5A-33

Pedestrian-control signals.

Whenever special pedestrian-control signals exhibiting the words or symbols "walk" or "don't walk" are in place such signals shall indicate as follows:

(1) "WALK". Pedestrians facing such signal may proceed across the roadway in the direction of the signal and shall be given the right of way by the drivers of all vehicles.

(2) "DON'T WALK". No pedestrian shall start to cross the roadway in the direction of such signal, but any pedestrian who has partially completed his or her crossing on the walk signal shall proceed to a sidewalk or safety island while the "don't walk" signal is showing.

(3) "DON'T WALK" (flashing). No pedestrian shall start to cross the roadway in the direction of such signal, but any pedestrian who has partially completed his or her crossing on the walk signal shall proceed to a sidewalk or safety island while the "don't walk" signal is flashing.

(Acts 1980, No. 80-434, p. 604, §2-103.)

Disclaimer: These codes may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.