40 C.F.R. PART 63--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
TITLE 40--Protection of Environment
CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY
PART 63--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
Subpart QQQ--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR PRIMARY COPPER SMELTING
|
|
| What is the purpose of this subpart?
|
|
|
|
| Am I subject to this subpart?
|
|
|
|
| What parts of my plant does this subpart cover?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| What emissions limitations and work practice standards must I meet for my copper concentrate dryers, smelting furnaces, slag cleaning vessels, and copper converter departments?
|
|
|
|
| What work practice standards must I meet for my fugitive dust sources?
|
|
|
|
| What alternative emission limitation may I meet for my combined gas streams?
|
|
|
|
| What are my operation and maintenance requirements?
|
|
|
|
| What are my general requirements for complying with this subpart?
|
|
|
|
| By what dates must I conduct performance tests or other initial compliance demonstrations?
|
|
|
|
| What test methods and other procedures must I use to demonstrate initial compliance with the emission limitations?
|
|
|
|
| How do I demonstrate initial compliance with the emission limitations, work practice standards, and operation and maintenance requirements that apply to me?
|
|
|
|
| What are my monitoring requirements?
|
|
|
|
| How do I demonstrate continuous compliance with the emission limitations, work practice standards, and operation and maintenance requirements that apply to me?
|
|
|
|
| What notifications must I submit and when?
|
|
|
|
| What reports must I submit and when?
|
|
|
|
| What records must I keep and how long must I keep my records?
|
|
|
|
| What part of the general provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
Subpart RRR--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SECONDARY ALUMINUM PRODUCTION
|
|
| Incorporation by reference.
|
|
|
|
| Emission standards for affected sources and emission units.
|
|
|
|
| Performance test/compliance demonstration general requirements.
|
|
|
|
| Performance test/compliance demonstration requirements and procedures.
|
|
|
|
| Equations for determining compliance.
|
|
|
|
| Applicability of general provisions.
|
|
|
|
| Implementation and enforcement.
|
|
Subpart SSS--[RESERVED]
Subpart TTT--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR PRIMARY LEAD SMELTING
|
|
| Standards for process and process fugitive sources.
|
|
|
|
| Standards for fugitive dust sources.
|
|
|
|
| Notification requirements.
|
|
|
|
| Recordkeeping and reporting requirements.
|
|
|
|
| Implementation and enforcement.
|
|
Subpart UUU--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR PETROLEUM REFINERIES: CATALYTIC CRACKING UNITS, CATALYTIC REFORMING UNITS, AND SULFUR RECOVERY UNITS
|
|
| What is the purpose of this subpart?
|
|
|
|
| Am I subject to this subpart?
|
|
|
|
| What parts of my plant are covered by this subpart?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| What are my requirements for metal HAP emissions from catalytic cracking units?
|
|
|
|
| What are my requirements for organic HAP emissions from catalytic cracking units?
|
|
|
|
| What are my requirements for organic HAP emissions from catalytic reforming units?
|
|
|
|
| What are my requirements for inorganic HAP emissions from catalytic reforming units?
|
|
|
|
| What are my requirements for HAP emissions from sulfur recovery units?
|
|
|
|
| What are my requirements for HAP emissions from bypass lines?
|
|
|
|
| What are my general requirements for complying with this subpart?
|
|
|
|
| How and when do I conduct a performance test or other initial compliance demonstration?
|
|
|
|
| What are my monitoring installation, operation, and maintenance requirements?
|
|
|
|
| What are my monitoring alternatives?
|
|
|
|
| What notifications must I submit and when?
|
|
|
|
| What reports must I submit and when?
|
|
|
|
| What records must I keep, in what form, and for how long?
|
|
|
|
| What parts of the General Provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
|
|
|
Table 4 to Subpart UUU of Part 63--Requirements for Performance Tests for Metal HAP Emissions From Catalytic Cracking Units Not Subject to the New Source Performance Standard (NSPS) for Particulate Matter (PM)
|
|
|
|
|
Table 11 to Subpart UUU of Part 63--Requirements for Performance Tests for Organic HAP Emissions From Catalytic Cracking Units Not Subject to New Source Performance Standard (NSPS) for Carbon Monoxide (CO)
|
|
|
|
|
Table 32 to Subpart UUU of Part 63--Requirements for Performance Tests for HAP Emissions From Sulfur Recovery Units Not Subject to the New Source Performance Standards for Sulfur Oxides
|
|
|
|
|
Table 40 to Subpart UUU of Part 63--Requirements for Installation, Operation, and Maintenance of Continuous Opacity Monitoring Systems and Continuous Emission Monitoring Systems
|
|
Subpart VVV--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: PUBLICLY OWNED TREATMENT WORKS
|
|
| Am I subject to this subpart?
|
|
|
|
| Does the subpart distinguish between different types of POTW treatment plants?
|
|
|
|
| What are the characteristics of an industrial POTW treatment plant?
|
|
|
|
| What are the emission points and control requirements for an industrial POTW treatment plant?
|
|
|
|
| When do I have to comply?
|
|
|
|
| How does an industrial POTW treatment plant demonstrate compliance?
|
|
|
|
| What are the emission points and control requirements for a non-industrial POTW treatment plant?
|
|
|
|
| When do I have to comply?
|
|
|
|
| What inspections must I conduct?
|
|
|
|
| What records must I keep?
|
|
|
|
| What reports must I submit?
|
|
|
|
| What are my notification requirements?
|
|
|
|
| Which General Provisions apply to my POTW treatment plant?
|
|
|
|
| Who enforces this subpart?
|
|
Subpart WWW--[RESERVED]
Subpart XXX--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR FERROALLOYS PRODUCTION: FERROMANGANESE AND SILICOMANGANESE
|
|
| Applicability and compliance dates.
|
|
|
|
| Operational and work practice standards.
|
|
|
|
| Maintenance requirements.
|
|
|
|
| Performance testing, test methods, and compliance demonstrations.
|
|
|
|
| Notification requirements.
|
|
|
|
| Recordkeeping requirements.
|
|
|
|
| Implementation and enforcement.
|
|
Subpart AAAA--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: MUNICIPAL SOLID WASTE LANDFILLS
|
|
| What is the purpose of this subpart?
|
|
|
|
| Am I subject to this subpart?
|
|
|
|
| What is the affected source of this subpart?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| When do I have to comply with this subpart if I own or operate a bioreactor?
|
|
|
|
| When am I no longer required to comply with this subpart?
|
|
|
|
| When am I no longer required to comply with the requirements of this subpart if I own or operate a bioreactor?
|
|
|
|
| What requirements must I meet?
|
|
|
|
| How is compliance determined?
|
|
|
|
| How do I calculate the 3-hour block average used to demonstrate compliance?
|
|
|
|
| What records and reports must I keep and submit?
|
|
|
|
| Who enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
Subpart CCCC--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: MANUFACTURING OF NUTRITIONAL YEAST
|
|
| What is the purpose of this subpart?
|
|
|
|
| Am I subject to this subpart?
|
|
|
|
| What parts of my plant does this subpart cover?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| What emission limitations must I meet?
|
|
|
|
| What are my general requirements for complying with this subpart?
|
|
|
|
| By what date must I conduct an initial compliance demonstration?
|
|
|
|
| What performance tests and other procedures must I use if I monitor brew ethanol?
|
|
|
|
| When must I conduct subsequent performance tests?
|
|
|
|
| If I monitor fermenter exhaust, what are my monitoring installation, operation, and maintenance requirements?
|
|
|
|
| If I monitor brew ethanol, what are my monitoring installation, operation, and maintenance requirements?
|
|
|
|
| How do I demonstrate initial compliance with the emission limitations if I monitor fermenter exhaust?
|
|
|
|
| How do I demonstrate initial compliance with the emission limitations if I monitor brew ethanol?
|
|
|
|
| How do I monitor and collect data to demonstrate continuous compliance?
|
|
|
|
| How do I demonstrate continuous compliance with the emission limitations?
|
|
|
|
| What notifications must I submit and when?
|
|
|
|
| What reports must I submit and when?
|
|
|
|
| What records must I keep?
|
|
|
|
| In what form and how long must I keep my records?
|
|
|
|
| What parts of the General Provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
Subpart DDDD--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: PLYWOOD AND COMPOSITE WOOD PRODUCTS
|
|
| What is the purpose of this subpart?
|
|
|
|
| Does this subpart apply to me?
|
|
|
|
| What parts of my plant does this subpart cover?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| What are the compliance options and operating requirements and how must I meet them?
|
|
|
|
| What are the work practice requirements and how must I meet them?
|
|
|
|
| What are the general requirements?
|
|
|
|
| What are the requirements for the routine control device maintenance exemption?
|
|
|
|
| What are the requirements for process units that have no control or work practice requirements?
|
|
|
|
| How do I demonstrate initial compliance with the compliance options, operating requirements, and work practice requirements?
|
|
|
|
| By what date must I conduct performance tests or other initial compliance demonstrations?
|
|
|
|
| How do I conduct performance tests and establish operating requirements?
|
|
|
|
| Initial compliance demonstration for a dry rotary dryer.
|
|
|
|
| Initial compliance demonstration for a hardwood veneer dryer.
|
|
|
|
| Initial compliance demonstration for a softwood veneer dryer.
|
|
|
|
| Initial compliance demonstration for a veneer redryer.
|
|
|
|
| Initial compliance demonstration for a reconstituted wood product press or board cooler.
|
|
|
|
| Initial compliance demonstration for a wet control device.
|
|
|
|
| What are my monitoring installation, operation, and maintenance requirements?
|
|
|
|
| How do I monitor and collect data to demonstrate continuous compliance?
|
|
|
|
| How do I demonstrate continuous compliance with the compliance options, operating requirements, and work practice requirements?
|
|
|
|
| What notifications must I submit and when?
|
|
|
|
| What reports must I submit and when?
|
|
|
|
| What records must I keep?
|
|
|
|
| In what form and how long must I keep my records?
|
|
|
|
| What parts of the General Provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
|
|
|
Appendix A to Subpart DDDD of Part 63--Alternative Procedure To Determine Capture Efficiency From Enclosures Around Hot Presses in the Plywood and Composite Wood Products Industry Using Sulfur Hexafluoride Tracer Gas
|
|
|
|
|
Appendix B to Subpart DDDD of Part 63--Methodology and Criteria for Demonstrating That an Affected Source Is Part of the Low-Risk Subcategory of Plywood and Composite Wood Products Manufacturing Affected Sources
|
|
Subpart EEEE--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: ORGANIC LIQUIDS DISTRIBUTION (NON-GASOLINE)
|
|
| What is the purpose of this subpart?
|
|
|
|
| Am I subject to this subpart?
|
|
|
|
| What parts of my plant does this subpart cover?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| What are my requirements for emission sources not requiring control?
|
|
|
|
| What emission limitations, operating limits, and work practice standards must I meet?
|
|
|
|
| What are my general requirements for complying with this subpart?
|
|
|
|
| What performance tests, design evaluations, and performance evaluations must I conduct?
|
|
|
|
| By what date must I conduct performance tests and other initial compliance demonstrations?
|
|
|
|
| When must I conduct subsequent performance tests?
|
|
|
|
| What are my monitoring installation, operation, and maintenance requirements?
|
|
|
|
| How do I demonstrate initial compliance with the emission limitations, operating limits, and work practice standards?
|
|
|
|
| When do I monitor and collect data to demonstrate continuous compliance and how do I use the collected data?
|
|
|
|
| How do I demonstrate continuous compliance with the emission limitations, operating limits, and work practice standards?
|
|
|
|
| What notifications must I submit and when and what information should be submitted?
|
|
|
|
| What reports must I submit and when and what information is to be submitted in each?
|
|
|
|
| What records must I keep?
|
|
|
|
| In what form and how long must I keep my records?
|
|
|
|
| What compliance options do I have if part of my plant is subject to both this subpart and another subpart?
|
|
|
|
| What parts of the General Provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
Subpart FFFF--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: MISCELLANEOUS ORGANIC CHEMICAL MANUFACTURING
|
|
| What is the purpose of this subpart?
|
|
|
|
| Am I subject to the requirements in this subpart?
|
|
|
|
| What parts of my plant does this subpart cover?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| What are my general requirements for complying with this subpart?
|
|
|
|
| What requirements must I meet for continuous process vents?
|
|
|
|
| What requirements must I meet for batch process vents?
|
|
|
|
| What requirements must I meet for process vents that emit hydrogen halide and halogen HAP or HAP metals?
|
|
|
|
| What requirements must I meet for storage tanks?
|
|
|
|
| What requirements must I meet for transfer racks?
|
|
|
|
| What requirements must I meet for equipment leaks?
|
|
|
|
| What requirements must I meet for wastewater streams and liquid streams in open systems within an MCPU?
|
|
|
|
| What requirements must I meet for heat exchange systems?
|
|
|
|
| How do I comply with the pollution prevention standard?
|
|
|
|
| How do I comply with emissions averaging?
|
|
|
|
| How do I comply with the alternative standard?
|
|
|
|
| What notifications must I submit and when?
|
|
|
|
| What reports must I submit and when?
|
|
|
|
| What records must I keep?
|
|
|
|
| What compliance options do I have if part of my plant is subject to both this subpart and another subpart?
|
|
|
|
| What parts of the General Provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
Subpart GGGG--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: SOLVENT EXTRACTION FOR VEGETABLE OIL PRODUCTION
|
|
| What is the purpose of this subpart?
|
|
|
|
| Where can I find definitions of key words used in this subpart?
|
|
|
|
| Am I subject to this subpart?
|
|
|
|
| Is my source categorized as existing or new?
|
|
|
|
| When do I have to comply with the standards in this subpart?
|
|
|
|
| What emission requirements must I meet?
|
|
|
|
| How do I comply with the hazardous air pollutant emission standards?
|
|
|
|
| What is a plan for demonstrating compliance?
|
|
|
|
| What is a startup, shutdown, and malfunction plan?
|
|
|
|
| How do I determine the actual solvent loss?
|
|
|
|
| How do I determine the weighted average volume fraction of HAP in the actual solvent loss?
|
|
|
|
| How do I determine the quantity of oilseed processed?
|
|
|
|
| What notifications must I submit and when?
|
|
|
|
| What reports must I submit and when?
|
|
|
|
| What records must I keep?
|
|
|
|
| In what form and how long must I keep my records?
|
|
|
|
| What parts of the General Provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|
Subpart HHHH--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR WET-FORMED FIBERGLASS MAT PRODUCTION
|
|
| What is the purpose of this subpart?
|
|
|
|
| Does this subpart apply to me?
|
|
|
|
| What parts of my plant does this subpart cover?
|
|
|
|
| What emission limits must I meet?
|
|
|
|
| What operating limits must I meet?
|
|
|
|
| When do I have to comply with these standards?
|
|
|
|
| How do I comply with the standards?
|
|
|
|
| What must my operation, maintenance, and monitoring (OMM) plan include?
|
|
|
|
| How do I change my OMM plan?
|
|
|
|
| Can I conduct short-term experimental production runs that cause parameters to deviate from operating limits?
|
|
|
|
| When must I conduct performance tests?
|
|
|
|
| How do I conduct a performance test?
|
|
|
|
| What test methods must I use in conducting performance tests?
|
|
|
|
| How do I verify the performance of monitoring equipment?
|
|
|
|
| What equations must I use to determine compliance?
|
|
|
|
| What are the requirements for monitoring devices?
|
|
|
|
| What records must I maintain?
|
|
|
|
| In what form and for how long must I maintain records?
|
|
|
|
| What notifications and reports must I submit?
|
|
|
|
| What sections of the general provisions apply to me?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| Incorporation by reference.
|
|
|
|
| What definitions apply to this subpart?
|
|
Subpart IIII--NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: SURFACE COATING OF AUTOMOBILES AND LIGHT-DUTY TRUCKS
|
|
| What is the purpose of this subpart?
|
|
|
|
| Am I subject to this subpart?
|
|
|
|
| What parts of my plant does this subpart cover?
|
|
|
|
| When do I have to comply with this subpart?
|
|
|
|
| What emission limits must I meet for a new or reconstructed affected source?
|
|
|
|
| What emission limits must I meet for an existing affected source?
|
|
|
|
| How must I control emissions from my electrodeposition primer system if I want to comply with the combined primer-surfacer, topcoat, final repair, glass bonding primer, and glass bonding adhesive emission limit?
|
|
|
|
| What operating limits must I meet?
|
|
|
|
| What work practice standards must I meet?
|
|
|
|
| What are my general requirements for complying with this subpart?
|
|
|
|
| What parts of the General Provisions apply to me?
|
|
|
|
| What notifications must I submit?
|
|
|
|
| What reports must I submit?
|
|
|
|
| What records must I keep?
|
|
|
|
| In what form and for how long must I keep my records?
|
|
|
|
| By what date must I conduct the initial compliance demonstration?
|
|
|
|
| How do I demonstrate initial compliance with the emission limitations?
|
|
|
|
| How do I demonstrate continuous compliance with the emission limitations?
|
|
|
|
| By what date must I conduct performance tests and other initial compliance demonstrations?
|
|
|
|
| How do I demonstrate initial compliance?
|
|
|
|
| How do I demonstrate continuous compliance with the emission limitations?
|
|
|
|
| What are the general requirements for performance tests?
|
|
|
|
| How do I determine the emission capture system efficiency?
|
|
|
|
| How do I determine the add-on control device emission destruction or removal efficiency?
|
|
|
|
| How do I establish the add-on control device operating limits during the performance test?
|
|
|
|
| What are the requirements for continuous parameter monitoring system installation, operation, and maintenance?
|
|
|
|
| By what date must I conduct performance tests and other initial compliance demonstrations?
|
|
|
|
| How do I demonstrate initial compliance?
|
|
|
|
| How do I demonstrate continuous compliance with the emission limitations?
|
|
|
|
| Who implements and enforces this subpart?
|
|
|
|
| What definitions apply to this subpart?
|
|