40 C.F.R. PART 457—EXPLOSIVES MANUFACTURING POINT SOURCE CATEGORY
Title 40 - Protection of Environment
Authority: Secs. 301, 304(b) and (c), 306(b), 307(b) and (c), Federal Water Pollution Control Acts, as amended (33 U.S.C. 1251, 1311, 1314(b) and (c), 1316(b) and 1317(b) and (c), 86 Stat. 816 et seq.; Pub. L. 92–500) (the Act).
Source: 41 FR 10184, Mar. 9, 1976, unless otherwise noted.
The provisions of this subpart are applicable to discharges resulting from the production of explosives. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart. (b) The term “product” shall mean dynamite, nitroglycerin, cyclotrimethylene trinitramine (RDX), cyclotetramethylene tetranitramine (HMX), and trinitrotoluene (TNT). Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart, shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of explosives by a point source subject to the provisions of this paragraph after application of the best practical control technology currently available: [41 FR 10184, Mar. 9, 1976, as amended at 60 FR 33971, June 29, 1995] The provisions of this subpart are applicable to discharges resulting from explosives load, assemble and pack plants. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart. (b) The term “product” shall mean products from plants which blend explosives and market a final product, and plants that fill shells and blasting caps. Examples of such installations would be plants manufacturing ammonium nitrate and fuel oil (ANFO), nitrocarbonitrate (NCN), slurries, water gels, and shells. Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart, shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the explosives load, assemble and pack plants by a point source subject to the provisions of this paragraph after application of the best practical control technology currently available: [41 FR 10184, Mar. 9, 1976, as amended at 60 FR 33971, June 29, 1995]
Title 40: Protection of Environment
PART 457—EXPLOSIVES MANUFACTURING POINT SOURCE CATEGORY
Section Contents
§ 457.10 Applicability; description of the commercial manufacture of explosives subcategory.
§ 457.11 Specialized definitions.
§ 457.12 Effluent limitations and guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 457.30 Applicability; description of the commercial explosives load, assemble and pack plants subcategory.
§ 457.31 Specialized definitions.
§ 457.32 Effluent limitations and guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
Subpart A—Manufacture of Explosives Subcategory
top
§ 457.10 Applicability; description of the commercial manufacture of explosives subcategory.
top
§ 457.11 Specialized definitions.
top
§ 457.12 Effluent limitations and guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
[Metric units, kg/kkg of product; English units, lb/1,000 lb of product]------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------COD....................................... 7.77 2.59BOD5...................................... 0.72 0.24TSS....................................... 0.25 0.084pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
Subpart B [Reserved]
top
Subpart C—Explosives Load, Assemble, and Pack Plants Subcategory
top
§ 457.30 Applicability; description of the commercial explosives load, assemble and pack plants subcategory.
top
§ 457.31 Specialized definitions.
top
§ 457.32 Effluent limitations and guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
[Metric units, kg/kkg of product; English units, lb/1,000 lb of product]------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------O&G................................... 0.11 0.035TSS....................................... 0.26 0.088pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.