Title 40: Protection of Environment
Browse Previous |
Browse Next
PART 426—GLASS MANUFACTURING POINT SOURCE CATEGORY
Section Contents
Subpart A—Insulation Fiberglass Subcategory
§ 426.10 Applicability; description of the insulation fiberglass subcategory.
§ 426.11 Specialized definitions.
§ 426.12 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.13 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.14 [Reserved]
§ 426.15 Standards of performance for new sources.
§ 426.16 Pretreatment standards for new sources.
§ 426.17 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
Subpart B—Sheet Glass Manufacturing Subcategory
§ 426.20 Applicability; description of the sheet glass manufacturing subcategory.
§ 426.21 Specialized definitions.
§ 426.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.23 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.24 Pretreatment standards for existing sources.
§ 426.25 Standards of performance for new sources.
§ 426.26 Pretreatment standards for new sources.
§ 426.27 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart C—Rolled Glass Manufacturing Subcategory
§ 426.30 Applicability; description of the rolled glass manufacturing subcategory.
§ 426.31 Specialized definitions.
§ 426.32 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.33 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.34 Pretreatment standards for existing sources.
§ 426.35 Standards of performance for new sources.
§ 426.36 Pretreatment standards for new sources.
§ 426.37 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart D—Plate Glass Manufacturing Subcategory
§ 426.40 Applicability; description of the plate glass manufacturing subcategory.
§ 426.41 Specialized definitions.
§ 426.42 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.43 [Reserved]
§ 426.44 Pretreatment standards for existing sources.
§ 426.45 Standards of performance for new sources.
§ 426.46 Pretreatment standards for new sources.
§ 426.47 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
Subpart E—Float Glass Manufacturing Subcategory
§ 426.50 Applicability; description of the float glass manufacturing subcategory.
§ 426.51 Specialized definitions.
§ 426.52 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.53 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.54 [Reserved]
§ 426.55 Standards of performance for new sources.
§ 426.56 Pretreatment standards for new sources.
§ 426.57 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart F—Automotive Glass Tempering Subcategory
§ 426.60 Applicability; description of the automotive glass tempering subcategory.
§ 426.61 Specialized definitions.
§ 426.62 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.63 [Reserved]
§ 426.64 Pretreatment standards for existing sources.
§ 426.65 Standards of performance for new sources.
§ 426.66 Pretreatment standards for new sources.
§ 426.67 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart G—Automotive Glass Laminating Subcategory
§ 426.70 Applicability; description of the automotive glass laminating subcategory.
§ 426.71 Specialized definitions.
§ 426.72 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.73 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.74 [Reserved]
§ 426.75 Standards of performance for new sources.
§ 426.76 Pretreatment standards for new sources.
§ 426.77 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart H—Glass Container Manufacturing Subcategory
§ 426.80 Applicability; description of the glass container manufacturing subcategory.
§ 426.81 Specialized definitions.
§ 426.82 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§§ 426.83-426.84 [Reserved]
§ 426.85 Standards of performance for new sources.
§ 426.86 Pretreatment standards for new sources.
§ 426.87 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart I—Machine Pressed and Blown Glass Manufacturing Subcategory [Reserved]
Subpart J—Glass Tubing (Danner) Manufacturing Subcategory
§ 426.100 Applicability; description of the glass tubing (Danner) manufacturing subcategory.
§ 426.101 Specialized definitions.
§ 426.102 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§§ 426.103-426.104 [Reserved]
§ 426.105 Standards of performance for new sources.
§ 426.106 Pretreatment standards for new sources.
§ 426.107 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart K—Television Picture Tube Envelope Manufacturing Subcategory
§ 426.110 Applicability; description of the television picture tube envelope manufacturing subcategory.
§ 426.111 Specialized definitions.
§ 426.112 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.113 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.114 [Reserved]
§ 426.115 Standards of performance for new sources.
§ 426.116 Pretreatment standards for new sources.
§ 426.117 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart L—Incandescent Lamp Envelope Manufacturing Subcategory
§ 426.120 Applicability; description of the incandescent lamp envelope manufacturing subcategory.
§ 426.121 Specialized definitions.
§ 426.122 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.123 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.124 [Reserved]
§ 426.125 Standards of performance for new sources.
§ 426.126 Pretreatment standards for new sources.
§ 426.127 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
Subpart M—Hand Pressed and Blown Glass Manufacturing Subcategory
§ 426.130 Applicability; description of the hand pressed and blown glass manufacturing subcategory.
§ 426.131 Specialized definitions.
§ 426.132 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§ 426.133 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§ 426.134 [Reserved]
§ 426.135 Standards of performance for new sources.
§ 426.136 Pretreatment standards for new sources.
§ 426.137 [Reserved]
Authority: Secs. 301, 304 (b) and (c), 306 (b) and (c), 307(c), and 316(b) of the Federal Water Pollution Control Act, as amended; 33 U.S.C. 1251, 1311, 1314, 1316 (b) and (c), 1317(b); 86 Stat. 816 et seq., Pub. L. 92–500; 91 Stat. 1567, Pub. L. 95–217.
Source: 39 FR 2565, Jan. 22, 1974, unless otherwise noted.
Subpart A—Insulation Fiberglass Subcategory
top
§ 426.10 Applicability; description of the insulation fiberglass subcategory.
top
The provisions of this subpart are applicable to discharges resulting from the production of insulation fiberglass in which molten glass is either directly or indirectly made, continuously fiberized and chemically bonded into a wool-like material.
§ 426.11 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
(b) The term “cullet water” shall mean that water which is exclusively and directly applied to molten glass in order to solidify the glass.
(c) The term “advanced air emission control devices” shall mean air pollution control equipment, such as electrostatic precipitators and high energy scrubbers, that are used to treat an air discharge which has been treated initially by equipment including knock-out chambers and low energy scrubbers.
§ 426.12 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available:
(a) There shall be no discharge of process waste water pollutants to navigable waters, except as permitted in paragraph (b) of this section.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged in process waste water from advanced air emission control devices, when such water cannot be consumed in the process.
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (kilograms per 1,000 kg of product) -----------------------------Phenol.................................... 0.0006 0.0003COD....................................... 0.33 .165BOD5...................................... 0.024 .012TSS....................................... 0.03 .015pH........................................ (\1\) (\1\) ----------------------------- English units (pounds per 1,000 lb. of product) -----------------------------Phenol.................................... 0.0006 0.0003COD....................................... 0.33 .165BOD5...................................... 0.024 .012TSS....................................... 0.03 .015pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
|
[39 FR 2565, Jan. 22, 1974; 39 FR 4760, Feb. 7, 1974]
§ 426.13 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: There shall be no discharge of process waste water pollutants to navigable waters.
§ 426.14 [Reserved]
top
§ 426.15 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties which may be discharged by a new source subject to the provisions of this subpart: There shall be no discharge of process waste water pollutants to navigable waters.
§ 426.16 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
(a) Applicability. The provisions of this section shall apply to discharges of process waste water pollutants into publicly owned treatment works except for that portion of the waste stream which constitutes cullet water.
(b) [Reserved]
[39 FR 2565, Jan. 22, 1974, as amended at 60 FR 33958, June 29, 1995]
§ 426.17 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.12 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart B—Sheet Glass Manufacturing Subcategory
top
Source: 39 FR 5714, Feb. 14, 1974, unless otherwise noted.
§ 426.20 Applicability; description of the sheet glass manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges of pollutants resulting from the process in which several mineral ingredients (sand, soda ash, limestone, dolomite, cullen and other ingredients) are mixed, melted in a furnace, and drawn vertically from a melting tank to form sheet glass.
§ 426.21 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
(b) The term “cullet” shall mean any broken glass generated in the manufacturing process.
§ 426.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): There shall be no discharge of process waste water pollutants to navigable waters.
[60 FR 33958, June 29, 1995]
§ 426.23 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: There shall be no discharge of process waste water pollutants to navigable waters.
§ 426.24 Pretreatment standards for existing sources.
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart.
|
------------------------------------------------------------------------ Pollutant or pollutant property Pretreatment standard------------------------------------------------------------------------pH........................................ No limitation.TSS....................................... Do.------------------------------------------------------------------------
|
[40 FR 6444, Feb. 11, 1975, as amended at 60 FR 33958, June 29, 1995]
§ 426.25 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties which may be discharged by a new source subject to the provisions of this subpart: There shall be no discharge of process waste water pollutants to navigable waters.
§ 426.26 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
[60 FR 33958, June 29, 1995]
§ 426.27 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties, which may be discharged by a point source subject to the provisions of this subpart after application of the best conventional pollutant control technology: There shall be no discharge of process waste water pollutants to navigable waters.
[44 FR 50746, Aug. 29, 1979]
Subpart C—Rolled Glass Manufacturing Subcategory
top
Source: 39 FR 5714, Feb. 14, 1974, unless otherwise noted.
§ 426.30 Applicability; description of the rolled glass manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges of pollutants resulting from the process in which several mineral ingredients (sand, soda ash, limestone, dolomite, cullet, and other ingredients) are mixed, melted in a furnace, and cooled by rollers to form rolled glass.
§ 426.31 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
(b) The term “cullet” shall mean any broken glass generated in the manufacturing process.
§ 426.32 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): There shall be no discharge of process waste water pollutants to navigable waters.
[60 FR 33958, June 29, 1995]
§ 426.33 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: There shall be no discharge of process waste water pollutants to navigable waters.
§ 426.34 Pretreatment standards for existing sources.
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart.
|
------------------------------------------------------------------------ Pollutant or pollutant property Pretreatment standard------------------------------------------------------------------------pH........................................ No limitation.TSS....................................... Do.------------------------------------------------------------------------
|
[40 FR 6444, Feb. 11, 1975, as amended at 60 FR 33958, June 29, 1995]
§ 426.35 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties which may be discharged by a new source subject to the provisions of this subpart: There shall be no discharge of process waste water pollutants to navigable waters.
§ 426.36 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
[60 FR 33958, June 29, 1995]
§ 426.37 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties, which may be discharged by a point source subject to the provisions of this subpart after application of the best conventional pollutant control technology: There shall be no discharge of process waste water pollutants to navigable waters.
[44 FR 50746, Aug. 29, 1979]
Subpart D—Plate Glass Manufacturing Subcategory
top
Source: 39 FR 5714, Feb. 14, 1974, unless otherwise noted.
§ 426.40 Applicability; description of the plate glass manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges of pollutants resulting from the process in which several mineral ingredients (sand, soda ash, limestone, dolomite, cullet and other ingredients) are melted in a furnace, pressed between rollers, and finally ground and polished to form plate glass.
§ 426.41 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
(b) The term “cullet” shall mean any broken glass generated in the manufacturing process.
§ 426.42 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (kg/ kkg of product) -----------------------------TSS....................................... 2.76 .138pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ ton of product) -----------------------------TSS....................................... 5.52 2.76pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
|
[39 FR 5714, Feb. 14, 1974, as amended at 60 FR 33958, June 29, 1995]
§ 426.43 [Reserved]
top
§ 426.44 Pretreatment standards for existing sources.
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart.
|
------------------------------------------------------------------------ Pollutant or pollutant property Pretreatment standard------------------------------------------------------------------------pH........................................ No limitation.TSS....................................... Do.------------------------------------------------------------------------
|
[40 FR 6444, Feb. 11, 1975, as amended at 60 FR 33958, June 29, 1995]
§ 426.45 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties which may be discharged by a new source subject to the provisions of this subpart: There shall be no discharge of process waste water pollutants to navigable waters.
§ 426.46 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
[60 FR 33958, June 29, 1995]
§ 426.47 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.42 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart E—Float Glass Manufacturing Subcategory
top
Source: 39 FR 5714, Feb. 14, 1974, unless otherwise noted.
§ 426.50 Applicability; description of the float glass manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges of pollutants resulting from the process in which several mineral ingredients (sand, soda ash, limestone, dolomite, cullet, and other ingredients) are mixed, melted in a furnace, and floated on a molten tin bath to produce float glass.
§ 426.51 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
§ 426.52 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (q/ kkg of product) -----------------------------TSS....................................... 2.00 2.00Oil....................................... 1.40 1.40Phosphorus................................ 0.05 .05pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ ton of product) -----------------------------TSS....................................... 0.0040 0.0040Oil....................................... 0.0028 .0028Phosphorus................................ 0.0001 .0001pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kg of product) -----------------------------Phosphorus................................ 0.05 .05 ----------------------------- English units (lb/ ton of product) -----------------------------Phosphorus................................ 0.0001 .0001------------------------------------------------------------------------
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of product) -----------------------------TSS....................................... 0.70 0.70Oil....................................... 1.40 1 .40Phosphorus................................ 0.05 .05pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ ton of product) -----------------------------TSS....................................... 0.0014 0.0014Oil....................................... 0.0028 .0028Phosphorus................................ 0.0001 .0001pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
§ 426.56 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
[60 FR 33958, June 29, 1995]
§ 426.57 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.52 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart F—Automotive Glass Tempering Subcategory
top
Source: 39 FR 5714, Feb. 14, 1974, unless otherwise noted.
§ 426.60 Applicability; description of the automotive glass tempering subcategory.
top
The provisions of this subpart are applicable to discharges of pollutants resulting from the processes in which glass is cut and then passed through a series of processes that grind and polish the edges, bend the glass, and then temper the glass to produce side and back windows for automobiles.
§ 426.61 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
(b) The term “tempering” shall mean the process whereby glass is heated near the melting point and then rapidly cooled to increase its mechanical and thermal endurance.
§ 426.62 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (q/ sq m of product) -----------------------------TSS....................................... 1.95 1.22Oil....................................... 0.64 .64pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,060 sq ft of product) -----------------------------TSS....................................... 0.40 0.25Oil....................................... 0.13 .13pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
|
[39 FR 5714, Feb. 14, 1974, as amended at 60 FR 33959, June 29, 1995]
§ 426.63 [Reserved]
top
§ 426.64 Pretreatment standards for existing sources.
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart.
|
------------------------------------------------------------------------ Pollutant or pollutant property Pretreatment standard------------------------------------------------------------------------pH........................................ No limitation.Oil....................................... Do.TSS....................................... Do.------------------------------------------------------------------------
|
[40 FR 6444, Feb. 11, 1975, as amended at 60 FR 33959, June 29, 1995]
§ 426.65 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (q/ sq m of product) -----------------------------TSS....................................... 0.24 0.24Oil....................................... 0.49 .49pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 sq ft of product) -----------------------------TSS....................................... 0.05 0.05Oil....................................... 0.10 .10pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
§ 426.66 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
[60 FR 33959, June 29, 1995]
§ 426.67 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.62 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart G—Automotive Glass Laminating Subcategory
top
Source: 39 FR 5714, Feb. 14, 1974, unless otherwise noted.
§ 426.70 Applicability; description of the automotive glass laminating subcategory.
top
The provisions of this subpart are applicable to discharges of pollutants resulting from the processes which laminate a plastic sheet between two layers of glass, and which prepare the glass for lamination such as cutting, bending and washing, to produce automobile windshields.
§ 426.71 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
§ 426.72 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (q/ sq m of product) -----------------------------TSS....................................... 4.40 4.40Oil....................................... 1.76 1.76Phosphorus................................ 1.07 1.07pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 sq ft of product) -----------------------------TSS....................................... 0.90 0.90Oil....................................... 0.36 .36Phosphorus................................ 0.22 .22pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (q/ sq m of products) -----------------------------Phosphorus................................ 0.30 .30 ----------------------------- English units (lb/ 1,000 sq ft of product) -----------------------------Phosphorus................................ 0.06 .06------------------------------------------------------------------------
|
[39 FR 5714, Feb. 14, 1974, as amended at 44 FR 50746, Aug. 29, 1979]
§ 426.74 [Reserved]
top
§ 426.75 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new point source subject to the provisions of this subpart:
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (q/ sq m of product) -----------------------------TSS....................................... 0.88 0.88Oil....................................... 1.76 1.76Phosphorus................................ 0.30 .30pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of product) -----------------------------TSS....................................... 0.18 0.18Oil....................................... 0.36 .36Phosphorus................................ 0.06 .06pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
§ 426.76 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
[60 FR 33959, June 29, 1995]
§ 426.77 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.72 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart H—Glass Container Manufacturing Subcategory
top
Source: 40 FR 2956, Jan. 16, 1975, unless otherwise noted.
§ 426.80 Applicability; description of the glass container manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges resulting from the process by which raw materials are melted in a furnace and mechanically processed into glass containers.
§ 426.81 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “furnace pull” shall mean that amount of glass drawn from the glass furnace or furnaces.
(c) The term “oil” shall mean those components of a waste water amenable to measurement by the technique or techniques described in the most recent addition of “Standard Methods” for the analysis of grease in polluted waters, waste waters, and effluents, such as “Standard Methods,” 13th Edition, 2nd Printing, page 407.
§ 426.82 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil....................................... 60.0 30.0TSS....................................... 140.0 70.0pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil....................................... 0.06 0.03TSS....................................... 0.14 0.07pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil....................................... 1.6 0.8TSS....................................... 1.6 0.8pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil....................................... 0.0016 0.0008TSS....................................... 0.0016 0.0008pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
§ 426.86 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart. Because of the recognition that animal and vegetable oils can be adequately removed in a publicly owned treatment works, whereas mineral oil may not be readily removed and may pass through untreated, two separate limitations are established.
|
------------------------------------------------------------------------ Pretreatment standards ----------------------------- Average of daily Pollutant or pollutant property Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil (animal and vegetable)................ (\1\) (\1\)Oil (mineral)............................. 60.0 30.0TSS....................................... (\1\) (\1\)pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil (animal and vegetable)................ (\1\) (\1\)Oil (mineral)............................. 0.06 0.03TSS....................................... (\1\) (\1\)pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ No limitation.
|
[40 FR 2956, Jan. 16, 1975, as amended at 60 FR 33959, June 29, 1995]
§ 426.87 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.82 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart I—Machine Pressed and Blown Glass Manufacturing Subcategory [Reserved]
top
Subpart J—Glass Tubing (Danner) Manufacturing Subcategory
top
Source: 40 FR 2957, Jan. 16, 1975, unless otherwise noted.
§ 426.100 Applicability; description of the glass tubing (Danner) manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges resulting from the process by which raw materials are melted in a furnace and glass tubing mechanically drawn from the furnace horizontally by means of the Danner process, which requires the intermittent quenching of cullet.
§ 426.101 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “furnace pull” shall mean that amount of glass drawn from the glass furnace or furnaces.
(c) The term “cullet” shall mean any excess glass generated in the manufacturing process.
§ 426.102 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------TSS....................................... 460.0 230.0pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------TSS....................................... 0.46 0.23pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------TSS....................................... 0.4 0.2pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------TSS....................................... 0.0004 0.0002pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
§ 426.106 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart.
|
------------------------------------------------------------------------ Pollutant or pollutant property Pretreatment standard------------------------------------------------------------------------pH........................................ No limitation.TSS....................................... Do.------------------------------------------------------------------------
|
[40 FR 2957, Jan. 16, 1975, as amended at 60 FR 33959, June 29, 1995]
§ 426.107 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.102 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart K—Television Picture Tube Envelope Manufacturing Subcategory
top
Source: 40 FR 2957, Jan. 16, 1975, unless otherwise noted.
§ 426.110 Applicability; description of the television picture tube envelope manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges resulting from the process by which raw materials are melted in a furnace and processed into television picture tube envelopes.
§ 426.111 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “furnace pull” shall mean that amount of glass drawn from the glass furnace or furnaces.
(c) The term “oil” shall mean those components of a waste water amenable to measurement by the technique or techniques described in the most recent addition of “Standard Methods” for the analysis of grease in polluted waters, waste waters, and effluents, such as “Standard Methods,” 13th Edition, 2nd Printing, page 407.
§ 426.112 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). (The fluoride and lead limitations are applicable to the abrasive polishing and acid polishing waste water streams while the TSS, oil, and pH limitations are applicable to the entire process waste water stream):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil....................................... 260.0 130.0TSS....................................... 300.0 150.0Fluoride.................................. 140.0 70.0Lead...................................... 39.0 4.5pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil....................................... 0.26 0.13TSS....................................... 0.30 0.15Fluoride.................................. 0.14 0.07Lead...................................... 0.009 0.0045pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Fluoride.................................. 120.0 60.0Lead...................................... 0.9 0.45 ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Fluoride.................................. 0.12 0.06Lead...................................... 0.0009 0.00045------------------------------------------------------------------------
|
[44 FR 50747, Aug. 29, 1979]
§ 426.114 [Reserved]
top
§ 426.115 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart (the fluoride and lead limitations are applicable to the abrasive polishing and acid polishing waste water streams while the TSS, oil, and pH limitations are applicable to the entire process waste water stream):
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil....................................... 260.0 130.0TSS....................................... 260.0 130.0Fluoride.................................. 120.0 60.0Lead...................................... 30.9 0.45pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil....................................... 0.26 0.13TSS....................................... 0.26 0.13Fluoride.................................. 0.12 0.06Lead...................................... 0.0009 0.00045pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
§ 426.116 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart. Because of the recognition that animal and vegetable oils can be adequately removed in a publicly owned treatment works, whereas mineral oil may not be readily removed and may pass through untreated, two separate limitations are established.
|
------------------------------------------------------------------------ Pretreatment standards ----------------------------- Average of daily Pollutant or pollutant property Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil (animal and vegetable)................ (\1\) (\1\)Oil (mineral)............................. 260.0 130.0TSS....................................... (\1\) (\1\)Fluoride.................................. 120.0 60.0Lead...................................... (\1\) (\1\)pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil (animal and vegetable)................ (\1\) (\1\)Oil....................................... 0.26 0.13TSS....................................... (\1\) (\1\)Fluoride.................................. 0.12 0.06Lead...................................... (\1\) (\1\)pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ No limitation.
|
[40 FR 2957, Jan. 16, 1975, as amended at 60 FR 33959, June 29, 1995]
§ 426.117 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in §401.16) in §426.112 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
Subpart L—Incandescent Lamp Envelope Manufacturing Subcategory
top
Source: 40 FR 2959, Jan. 16, 1975, unless otherwise noted.
§ 426.120 Applicability; description of the incandescent lamp envelope manufacturing subcategory.
top
The provisions of this subpart are applicable to discharges resulting from the processes by which (a) raw materials are melted in a furnace and mechanically processed into incandescent lamp envelopes or (b) incandescent lamp envelopes are etched with hydrofluoric acid to produce frosted envelopes.
§ 426.121 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “furnace pull” shall mean that amount of glass drawn from the glass furnace or furnaces.
(c) The term “oil” shall mean those components of a waste water amenable to measurement by the technique or techniques described in the most recent addition of “Standard Methods” for the analysis of grease in polluted waters, waste waters, and effluents, such as “Standard Methods,” 13th Edition, 2nd Printing, page 407.
(d) The term “product frosted” shall mean that portion of the “furnace pull” associated with the fraction of finished incandescent lamp envelopes which is frosted; this quantity shall be calculated by multiplying “furnace pull” by the fraction of finished incandescent lamp envelopes which is frosted.
§ 426.122 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Any manufacturing plant which produces incandescent lamp envelopes shall meet the following limitations with regard to the forming operations.
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil....................................... 230.0 115.0TSS....................................... 230.0 115.0pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil....................................... 0.23 0.115TSS....................................... 0.23 0.115pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
|
(b) Any manufacturing plant which frosts incandescent lamp envelopes shall meet the following limitations with regard to the finishing operations.
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of product frosted) -----------------------------Fluoride.................................. 230.0 115.0Ammonia................................... (\1\) (\1\)TSS....................................... 460.0 230.0pH........................................ (\2\) (\2\) ----------------------------- English units (lb/ 1000 lb of product frosted) -----------------------------Fluoride.................................. 0.23 0.115Ammonia................................... (\1\) (\1\)TSS....................................... 0.46 0.23pH........................................ (\2\) (\2\)------------------------------------------------------------------------\1\ No limitation.\2\ Within the range 6.0 to 9.0.
------------------------------------------------------------------------ Effluent limitations ------------------------- Average of daily Effluent characteristic values for Maximum for 30 any 1 day consecutive days shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of product frosted) -------------------------Fluoride...................................... 104.0 52.0Ammonia....................................... 240.0 120.0 ------------------------- English units (lb/ 1,000 lb of product frosted) -------------------------Fluoride...................................... 0.104 0.052Ammonia....................................... 0.24 0.12------------------------------------------------------------------------
|
[51 FR 25001, July 9, 1986]
§ 426.124 [Reserved]
top
§ 426.125 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
(a) Any manufacturing plant which produces incandescent lamp envelopes shall meet the following limitations with regard to the forming operations.
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of furnace pull) -----------------------------Oil....................................... 90.0 45.0TSS....................................... 90.0 45.0pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of furnace pull) -----------------------------Oil....................................... 0.09 0.045TSS....................................... 0.09 0.045pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
|
(b) Any manufacturing plant which frosts incandescent lamp envelopes shall meet the following limitations with regard to the finishing operations.
|
------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed_------------------------------------------------------------------------ Metric units (g/ kkg of product frosted) -----------------------------Fluoride.................................. 104.0 52.0Ammonia................................... 240.0 120.0TSS....................................... 80.0 40.0pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ 1,000 lb of product frosted) -----------------------------Fluoride.................................. 0.104 0.052Ammonia................................... 0.24 0.12TSS....................................... 0.08 0.04pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.