2006 Ohio Revised Code - [4513.20.2] 4513.202.Minimum standards for brakes and components.

[§ 4513.20.2] § 4513.202. Minimum standards for brakes and components.
 

(A)  No brake lining, brake lining material, or brake lining assemblies for use as repair and replacement parts in motor vehicles shall be sold in this state if these items do not meet or exceed the minimum standard of specifications established by the society of automotive engineers and the standard of specifications established in 49 C.F.R. 571.105, as amended, and 49 C.F.R. 571.135, as amended. 

(B)  All manufacturers or distributors of brake lining, brake lining material, or brake lining assemblies selling these items for use as repair and replacement parts in motor vehicles shall state that the items meet or exceed the applicable minimum standard of specifications. 

(C)  Whoever violates this section shall be punished as provided in section 4513.99 of the Revised Code. 

(D)  As used in this section, "minimum standard of specifications" means a minimum standard for brake system or brake component performance that meets the need for motor vehicle safety and complies with the applicable SAE standards and recommended practices, and the federal motor vehicle safety standards that cover the same aspect of performance for any brake lining, brake lining material, or brake lining assemblies. 
 

HISTORY: 134 v H 150 (Eff 9-8-71); 144 v S 98 (Eff 11-12-92); 147 v S 60. Eff 10-21-97; 149 v S 123, § 1, eff. 1-1-04.
 

The effective date is set by section 4 of S.B. 123. 

See provisions, § 5 of S.B. 123 (149 v  - ), following RC § 4501.01. 

 

Effect of Amendments

S.B. 123, Acts 2002, effective January 1, 2004, inserted present (C); and redesignated former (C) as (D).