2006 New York Code - Registrations Generally.



 
    § 24-109 Registrations generally. (a) In addition to the registrations
  required  by  subdivision (b) of this section the commissioner may order
  the written registration of emission sources other than those located in
  one or two family dwellings and motor vehicles. A period of  sixty  days
  from publication in the City Record of the commissioner's order shall be
  allowed  for  the filing of such registration. In cases of an emergency,
  the commissioner may designate a shorter period of time. (b)  No  person
  shall  cause  or  permit  the  following  unless  he  or  she  has first
  registered with the department:  (1)  the  spraying  of  any  insulating
  material  in  or  upon  any  building  or  other  structure  during  its
  construction, alteration or repair; (2) the demolition of  any  building
  or other structure, unless the building or structure is being demolished
  pursuant  to  chapter  one  of  title  seventeen  or  article  eight  of
  subchapter two of chapter one of title twenty-six of the code.
    (3) The installation, alteration, use or operation of any fuel burning
  equipment which in the aggregate, feeding into a common emission  point,
  has  a  Btu input or gross output equal to or greater than three hundred
  fifty thousand Btu per hour but less than one million Btu per hour.
    (4) The installation, alteration, use or operation of any fuel burning
  equipment which in the aggregate, feeding into a common emission  point,
  has  a  Btu input or gross output equal to or greater than three hundred
  fifty thousand Btu per hour but less than 2.8 million Btu per  hour  and
  which  uses  a  fuel  gas,  gasoline,  or fuel oil grades Nos. 1 or 2 as
  classified by the American society for testing and materials.
    (c) Registration shall be made on forms furnished by the department.
    (1) Forms for registration pursuant to subdivision (a) of this section
  may require information concerning the unit of equipment covered by  the
  registration,  the  kind  and  amount  of air contaminant emitted by the
  equipment, medical  and  other  scientific  information  concerning  the
  effects  of the air contaminant on persons, animals, and plants, and any
  additional information required by the commissioner for the  purpose  of
  enforcing this code.
    (2)  Forms  for  registration pursuant to paragraph one of subdivision
  (b) of this section shall require information concerning  the  kind  and
  amount  of  insulating material that will be sprayed, the composition of
  the  insulating  material,  medical  and  other  scientific  information
  concerning  the  effects of the insulating material on persons, animals,
  and property,  the  precautions  that  will  be  taken  to  prevent  the
  insulating  material  from  being  emitted  into  the  open air, and any
  additional information required by the commissioner for the  purpose  of
  enforcing  this  code.  Registration for spraying of insulating material
  shall be filed at least five days prior to commencement of such spraying
  work.
    (3) Forms for registration pursuant to paragraph  two  of  subdivision
  (b)  of  this  section shall require information concerning the kind and
  amount of particulate matter that it is reasonably  anticipated  may  be
  released  as  a  result  of the demolition, the precautions that will be
  taken to prevent particulate matter from  becoming  air-borne,  and  any
  additional  information  required by the commissioner for the purpose of
  enforcing this code.
    (4) The registrant shall maintain the registration in  current  status
  by  notifying  the commissioner of any change in any item of information
  furnished in compliance with  this  section,  other  than  a  change  in
  ownership, within a reasonable time not to exceed fifteen days.
    (d) Registration shall be made by the following persons:
    (1)  If  the  registrant  is  a  partnership  or  group  other  than a
  corporation, the registration shall be made by an individual  who  is  a
  member of the group.

(2) If the registrant is a corporation, the registration shall be made by an officer of the corporation. (3) In the case of registration pursuant to subdivision (a) of this section by the owner of the equipment. (4) In the case of registration pursuant to paragraph one of subdivision (b) of this section, by the person responsible for the construction, alteration or repair of the building or other structure in or upon which spraying will occur. (5) In the case of registration pursuant to paragraph two of subdivision (b) of this section, by the person responsible for the demolition of the building or structure. (e) Registration shall be made in duplicate. Upon approval thereof, a stamped copy of the registration shall be returned to the registrant, and shall be displayed in accordance with section 24-113 of this subchapter. * (f) Registration of equipment or apparatus shall be valid for a period of up to three years from the date of approval of the initial registration or renewal, unless sooner revoked or cancelled by the commissioner. Where a registration is renewed after its expiration, the registration fee charged in accordance with the provisions of this part shall be increased on a monthly pro-rated basis for the period of time between such expiration and renewal, unless it is shown to the satisfaction of the commissioner that registration was not required under the provisions of this chapter. * NB Amended L.L. 49/85 § 2, language juxtaposed per Ch. 907/85 § 14

Disclaimer: These codes may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.